【摘要】：針對熱拌混凝土生產過程中物料加熱、干燥能耗高等問題,通過實驗分析了滾筒內揚料葉片結構參數對料簾分布特性的影響,對滾筒干燥器和料簾進行離散元仿真建模,實現揚料葉片齒間距、寬度、折彎角最優設計,優化計算后得到齒間距為39mm、葉片寬度為40mm、折彎角為128°。構建能耗預測支持向量機模型,能耗預測誤差為±5%,實現滾筒干燥過程操作和生產參數的優化。
[Abstract]:In view of the problems of high energy consumption and heating of materials in hot mix concrete production, the influence of the structural parameters of lifting blade on the material curtain distribution characteristics in the drum is analyzed experimentally, and the discrete element simulation model of the drum dryer and curtain is carried out. The optimum design of tooth spacing, width and bending angle of lifting blade is realized. After optimized calculation, the tooth spacing is 39 mm, blade width is 40 mm, and bending angle is 128 擄. The energy consumption prediction support vector machine model is constructed, and the energy consumption prediction error is 鹵5, which realizes the optimization of the operation and production parameters of the drum drying process.
【作者單位】： 福建南方路面機械有限公司;華僑大學機電及自動化學院;寧夏維爾鑄造有限公司;
【基金】：國家國際合作項目(2015DFA710402) 福建省產學合作重大項目(2014H6017,2016H6013) 國家國際科技合作專項項目(2013DFA71270)
【分類號】：U415.522

【相似文獻】

相關期刊論文 前2條

1 姚雪東,高振江;氣流沖擊式滾筒干燥器的研究進展[J];包裝與食品機械;2005年05期

2 ;[J];;年期

，

本文編號：2153340