本文選題：斜拉橋 + 施工控制��； 參考：《大連理工大學》2015年碩士論文

【摘要】：改革開放以來,中國橋梁事業發展速度與水平均為世界第一。為了確保橋梁施工安全,在大跨橋梁施工過程中對橋梁進行施工監控是一項不可缺少的工作。在斜拉橋的施工監控中索力調整是計算中的重點內容。本文以同江峪斜拉橋工程為背景,對其進行施工監控。采用MIDAS/CIVIL有限元分析軟件對該橋梁進行施工監控仿真計算,模擬過程采用正裝和倒裝結合法,對施工階段的參數和狀態進行調整,使模擬結果更加精確和具有保證。施工監控內容主要包括：變形監測、應力檢測、索力監測和溫度監測四個部分,在監測過程中除了控制實測值在允許值之內以外,還對實測數據進行了誤差分析,總結計算索力邊界條件的試用范圍,以及對大體積混凝土溫度控制進行分析。大跨橋梁施工監控市場前景巨大,施工監控技術應用廣泛,本文研究目的是為斜拉橋施工監控的計算方法、監控參數、影響因素、結構安全控制提供思路,為今后大跨橋梁的施工監控工作提供可借鑒資料。
[Abstract]:Since the reform and opening up, China's bridge development speed and level are the first in the world. In order to ensure the safety of bridge construction, it is an indispensable work to monitor the construction of long span bridge. In the construction monitoring of cable-stayed bridge, the adjustment of cable force is the key content in calculation. Based on Tongjiangyu cable-stayed bridge project, the construction monitoring is carried out in this paper. Midas / CIVIL finite element analysis software is used to simulate and calculate the bridge construction monitoring and control. In the simulation process, the parameters and state of the construction stage are adjusted by the combination of fitting and inversion, so that the simulation results are more accurate and guaranteed. Construction monitoring includes four parts: deformation monitoring, stress detection, cable force monitoring and temperature monitoring. In the monitoring process, in addition to controlling the measured values within the allowable value, the error analysis of the measured data is also carried out. The trial range of cable force boundary condition is summarized and the temperature control of mass concrete is analyzed. The construction monitoring market of long-span bridges has a great prospect, and the construction monitoring technology is widely used. The purpose of this paper is to provide ideas for the calculation method, monitoring parameters, influencing factors and structural safety control of cable-stayed bridge construction monitoring. It can be used for reference for the construction monitoring work of long span bridge in the future.
【學位授予單位】：大連理工大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：U445

【參考文獻】

相關期刊論文 前1條

1 杜蓬娟,黃才良,張哲,劉春城;公和斜拉橋施工控制[J];大連理工大學學報;2003年06期

相關碩士學位論文 前1條

1 王強;蘇通大橋主橋施工控制方法介紹和研究[D];同濟大學;2007年

，

本文編號：2051543