發布時間：2018-06-06 03:36

  本文選題：機械工程 + 除塵器�。� 參考：《筑路機械與施工機械化》2017年10期

【摘要】：為了控制粉料撒布車加料和撒布時的揚塵污染,對國內外同類產品的典型除塵方式的結構與原理進行了總結,并分析了各自的優缺點,提出了將脈沖噴吹濾筒式除塵器用于粉料撒布車除塵的解決方案,給出了除塵器主要參數的計算方法和關鍵設計要點;指出通過合理控制撒布輥轉速和設計吸塵裝置可以有效地控制撒布揚塵,并給出了吸塵裝置的引風機流量的計算方法。實踐證明,據此設計的粉料撒布車脈沖噴吹濾筒式除塵器的排放濃度滿足環保要求。
[Abstract]:In order to control dust pollution caused by powder distributing vehicle feeding and dispersing, the structure and principle of typical dust removal methods of similar products at home and abroad are summarized, and their advantages and disadvantages are analyzed. In this paper, the solution of applying the pulse injection filter barrel dust collector to dust removal by powder distributor is put forward, and the calculation method and key design points of the main parameters of the dust collector are given. It is pointed out that the spread dust can be effectively controlled by reasonably controlling the rotation speed of the spreading roller and designing the dust suction device, and the calculation method of the flow rate of the induced fan of the dust suction device is given. It has been proved by practice that the emission concentration of the pulse-injection filter drum dust collector based on this design meets the requirements of environmental protection.
【作者單位】： 浙江美通筑路機械股份有限公司;中交西安筑路機械有限公司;
【基金】：浙江省科學技術廳科技項目(2015D60SA430600)
【分類號】：U415.52

【相似文獻】

相關期刊論文 前1條

1 楊乾銘;楊浩;;氮?dú)饧訅捍祾叻哿陷斔拖到y(tǒng)施工技術[J];安裝;2014年07期

，

本文編號：1984887