本文選題：道路工程 + 針入度指數��； 參考：《鐵道科學與工程學報》2017年10期

【摘要】：為了尋找一種合理的評價SBS改性瀝青性能的針入度測試方法,在3種針重、4種溫度條件下,對不同改性劑摻量和結構類型的SBS改性瀝青進行針入度試驗,同時,采用車轍試驗對SBS改性瀝青混合料的高溫性能進行分析。試驗結果表明:標準針入度測試方法下測定的針入度難以反映不同改性瀝青的稠度差異及高溫性能差異。在對試驗條件修正為"試驗溫度30℃,針重150 g,貫入時間5 s",即修正針入度法后,所測得的針入度能較好地評價SBS改性瀝青的感溫性能,且SBS改性瀝青針入度大小與混合料高溫性能有良好的相關性。
[Abstract]:In order to find a reasonable penetration test method for evaluating the performance of SBS modified asphalt, the penetration test of SBS modified asphalt with different modifier content and structure was carried out under three kinds of needle-weight and four temperature conditions. The high temperature performance of SBS modified asphalt mixture was analyzed by rutting test. The test results show that the penetration measured by the standard penetration test method can not reflect the consistency difference and the high temperature performance difference of different modified asphalt. When the test conditions were revised as "test temperature 30 鈩，

本文編號：1901740