本文選題：滾刀布局 + 遺傳算法��； 參考：《機械設計》2017年11期

【摘要】：全斷面巖石掘進機(TBM)是高度自動化的隧道掘進機械設備,其滾刀布局設計是刀盤快速有效掘進的關鍵技術。通過對TBM刀盤滾刀基本布局原則的總結,結合現有螺旋線布刀規律的研究分析,提出了變速螺旋線滾刀布局設計方法�；跐L刀破巖量差異最小化思想對正滾刀布局建立多目標優化模型,采用極徑與極角分步優化設計,利用遺傳算法對正滾刀極徑進行優化設計模型求解,再利用NSGA-Ⅱ算法對其極角多目標優化模型求解。以TB880E刀盤滾刀布局為算例,對其正滾刀布局優化設計進行分析,與原有刀盤滾刀布局對比得出:不平衡徑向力下降了33.9%,刀盤傾覆力矩下降了78.1%,正滾刀破巖方差也有了很大程度地減小,優化結果更利于正滾刀的均衡磨損。滾刀整體布局質心也更靠近刀盤中心。
[Abstract]:TBM is a highly automatic tunneling machine, and its hob layout design is the key technology for rapid and effective heading of cutter head. Based on the summary of the basic layout principle of TBM cutter head hob and the research and analysis of the existing helical cutter distribution law, the design method of variable speed helical hob layout is put forward. Based on the idea of minimizing the difference in rock mass of hobs, a multi-objective optimization model is established for the layout of normal hobs. The pole diameters and polar angles are designed step by step, and the genetic algorithm is used to solve the optimal design model of the normal hob diameters. Then NSGA- 鈪，

本文編號：1811977