本文選題：路面工程 + 集料��； 參考：《長安大學》2015年碩士論文

【摘要】：瀝青路面以其行車舒適、噪聲低、維修養護方便等優點而被廣泛應用,已成為我國高速公路和重交通道路主要的路面結構類型。在我國已建成的高等級公路中,瀝青混凝土路面約占80%以上。集料作為瀝青路面混合料的重要組成部分,其質量的好壞將直接影響瀝青混合料的質量,進而影響路面的質量和使用性能。目前,我國路面工程建設中的集料大多數來自社會料場,各料場質量、規格參差不齊,主要表現在料源控制不嚴格、材料不潔凈、粉塵多、針片狀含量超標、級配不規格等。因此,為了提高瀝青路面的修筑質量,應采取有效措施控制集料料源宕口的選擇和規范集料加工技術,尤其是對瀝青路面碎石加工時的工藝選擇和加工機械的選型。為了研究瀝青路面集料加工工藝和設備選型,首先從甘肅省的部分碎石加工廠調研入手,收集當今使用的集料加工設備和加工工藝,并對其巖石資源進行整理。其次通過對各類加工設備加工特點的研究和加工參數的調整,改善集料加工生產效率,提高資源利用率。最后通過對加工的集料各項性能指標的研究,提出集料加工優選的加工工藝和集料質量檢驗指標和頻率,以便為后期集料生產提供參考。研究表明,在集料生產時應注重對巖石的物理性能進行分析,并對加工機械的加工特點進行對比,本文提出的集料加工生產線可以提高集料生產效率和質量合格率,從而對瀝青混合料質量起到提高作用,進而提高瀝青路面的質量。
[Abstract]:Asphalt pavement is widely used for its advantages of comfortable driving, low noise, convenient maintenance and maintenance. It has become the main pavement structure type of highway and heavy traffic road in China. Asphalt concrete pavement accounts for more than 80% of the high-grade highways built in China. Aggregate as an important part of asphalt pavement mixture, its quality will directly affect the quality of asphalt mixture, and then affect the pavement quality and performance. At present, most of the aggregates in pavement engineering construction in our country come from the social material yard, the quality and specification of each material yard are not uniform, mainly in the following aspects: the material source control is not strict, the material is unclean, the dust is much, the needle sheet content exceeds the standard, the gradation is not standard and so on. Therefore, in order to improve the construction quality of asphalt pavement, effective measures should be taken to control the selection of aggregate source and to standardize aggregate processing technology, especially for the selection of asphalt pavement macadam process and the selection of processing machinery. In order to study the processing technology and equipment selection of asphalt pavement aggregate, starting with the investigation of some crushed stone processing plants in Gansu Province, this paper collects the aggregate processing equipment and processing technology used today, and collates its rock resources. Secondly, through the study of processing characteristics of various processing equipment and the adjustment of processing parameters, the production efficiency of aggregate processing and the utilization ratio of resources are improved. Finally, through the study of the various performance indexes of the aggregate processed, the processing technology, the quality inspection index and the frequency of aggregate quality are put forward in order to provide a reference for the later aggregate production. The research shows that the physical properties of rock should be analyzed in aggregate production, and the processing characteristics of machining machinery should be compared. The aggregate processing line proposed in this paper can improve the production efficiency and the qualified rate of aggregate quality. Therefore, it can improve the quality of asphalt mixture and then improve the quality of asphalt pavement.
【學位授予單位】：長安大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：U416.217

【參考文獻】

相關期刊論文 前5條

1 朱紅娟;劉濤;黃興;;瀝青混合料級配的控制[J];廣東公路交通;2009年02期

2 程小云;張爭奇;;粗集料形狀對熱拌瀝青混合料永久變形力學行為的影響[J];中外公路;2008年06期

3 黃景海;;集料含泥量對瀝青混合料水穩定性影響分析[J];交通科技與經濟;2008年05期

4 張金柱;尚新鴻;;集料針片狀含量對瀝青混合料的影響分析[J];甘肅科技;2007年11期

5 肖源杰;倪富健;蒯海東;都敬麗;;基于圖像的粗集料形態對瀝青面層抗剪性能的影響[J];鄭州大學學報(工學版);2006年04期

，

本文編號：1791676