本文關鍵詞：橋梁預應力張拉精細化施工監控系統研究　出處：《長安大學》2015年碩士論文　論文類型：學位論文

  更多相關文章： S3C2440 預應力張拉 智能控制 遠程監控

【摘要】：預應力梁的生產是橋梁建設中的關鍵環節。傳統預應力張拉施工工藝存在測量設備精度不夠、人工操作誤差大、同步性差、持荷時間不夠等諸多缺陷。本文針對上述實際問題,響應高速公路建設信息化、精細化管理的有關要求,依托某在建高速公路項目,應用現代計算機通信、傳感器技術開發設計了一套橋梁預應力張拉精細化施工監控系統。該系統能夠?qū)崟r(shí)采集監測張拉力和鋼絞線伸長量,自動精確控制張拉應力及張拉過程的同步性、對稱性,能夠自動生成報表并實時上傳共享到信息管理平臺,方便各級管理人員及時掌握預制梁場和橋梁預應力施工質量情況,達到“實時監測、智能控制、精細化管理”效果,具有非常重要的工程實踐意義。1、對預應力張拉施工工藝及技術規范進行了研究,采用模塊化設計思路,設計了包括預應力施工張拉主機、現場控制器、遠程信息管理平臺三部分的預應力張拉精細化施工監控系統。2、對預應力張拉施工張拉主機和現場控制器進行了設計開發。張拉主機部分主要對中央處理模塊、傳感器模塊及執行機構進行軟硬件設計。現場控制器主要對中央處理器、無線數傳模塊、GPRS無線通信模塊、存儲模塊進行硬件設計。3、采用B/S構架設計開發了預應力張拉遠程信息管理系統,對遠程信息管理系統的模塊設計、數據庫設計、軟件界面設計進行詳細敘述。本文的研究成果在預應力張拉施工及監管方面,有效克服傳統施工工藝的缺點,彌補人工操作的不足,對預應力施工過程中存在的質量問題加以監督和管理,提高了張拉過程的施工質量和管理水平。
[Abstract]:The production of prestressed beam is the key link in the bridge construction. The traditional prestressing tensioning construction technology has insufficient precision of measuring equipment, large error of manual operation and poor synchronicity. In view of the above practical problems, this paper, in response to the highway construction information, detailed management requirements, relying on a highway project under construction, the application of modern computer communications. The sensor technology has developed and designed a set of bridge prestressed tensioning fine construction monitoring system which can collect and monitor the tensioning force and the elongation of the steel strand in real time. Automatic accurate control of tension stress and tension process synchronization, symmetry, can automatically generate reports and real-time upload and share to the information management platform. It is convenient for managers at all levels to grasp the construction quality of prefabricated beam yard and bridge in time and achieve the effect of "real-time monitoring, intelligent control and fine management", which has very important practical significance .1. The construction technology and technical specification of prestressed tensioning are studied. The modular design idea is used to design the prestressing tensioning mainframe and field controller. Remote information management platform three parts of the prestressed tensioning fine construction monitoring system .2. The prestressing tensioning construction tensioning mainframe and field controller are designed and developed. The main tensioning main part is the central processing module. The sensor module and actuators are designed for hardware and software. The field controller mainly designs the central processor, wireless data transmission module and GPRS wireless communication module, and the storage module carries on the hardware design .3. The prestressing tensioning remote information management system is designed and developed by using the B / S frame. The module design and database design of the remote information management system are presented. The software interface design is described in detail. The research results of this paper effectively overcome the shortcomings of the traditional construction technology and make up for the shortage of manual operation in the aspects of prestressing tensioning construction and supervision. The quality problems existing in the process of prestress construction are supervised and managed, and the construction quality and management level of the tensioning process are improved.
【學位授予單位】：長安大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：U445.4

【參考文獻】

相關期刊論文 前8條

1 李孝兵;田士強;陳化祥;;預應力張拉監測設備在橋梁施工中的應用[J];公路交通科技(應用技術版);2012年01期

2 劉欣;邵媛媛;方加寶;朱井瑞;;無線數傳模塊在遠程監控系統中的應用[J];火力與指揮控制;2007年12期

3 柴金燕;;橋梁預應力混凝土現狀與發展[J];交通世界(建養.機械);2008年04期

4 馮子陵;俞建新;;RS485總線通信協議的設計與實現[J];計算機工程;2012年20期

5 胡建國;羅勇武;;基于RS485的單片機和變頻器通信控制多電機研究[J];機床與液壓;2013年22期

6 He Liu;Lei Wang;Sheng-Peng Sun;Ya-Dong Wang;;A Multi-Interface Remote Monitoring and Control System Architecture Based on Embedded Server[J];Journal of Harbin Institute of Technology;2013年06期

7 李昌斌;馬莉;房雪蓮;王永學;;無線數傳模塊的應用[J];信息技術;2012年07期

8 李珠;李海峰;李兵;代飛;;數字化技術在橋梁預應力工程中的研究[J];建筑施工;2007年01期

相關碩士學位論文 前1條

1 柏宏斌;基于B/S架構的信息管理系統理論研究[D];電子科技大學;2010年

，

本文編號：1424757