【摘要】：針對高可靠性立式軸系可傾瓦推力軸承在軸線傾斜下的均載問題,研究自適應結構平衡梁支撐推力軸承的均載能力及影響因素;建立平衡梁組件的自適應動力學模型,給出軸線傾斜下考慮平衡梁彎曲變形的軸承系統耦合模型,并提出采用不均勻系數表征軸承的均載能力;基于模型分析工況參數和結構參數對軸承均載能力的影響,結果表明:平衡梁結構的均載能力并不是完全均載,軸承均載能力隨著軸承載荷和軸線傾角的增大而減弱;推力瓦支點半徑對軸承均載能力有較大影響,而連接圓柱體半徑和下平衡梁支撐圓柱半徑對瓦塊載荷分布影響較小;對于立式軸系,合理控制軸線傾角可提高推力軸承的均載能力及軸系服役性能。
[Abstract]:Aiming at the load-sharing problem of the thrust bearing with tilting pad in the shaft system with high reliability, the load-equalizing capacity and the influencing factors of the self-adaptive balanced beam supporting thrust bearing are studied. The adaptive dynamic model of the balanced beam assembly is established, and the coupling model of the bearing system considering the bending deformation of the balanced beam under the axis tilting is presented, and the non-uniform coefficient is proposed to characterize the bearing's load-equalizing capacity. Based on the model, the effects of operating and structural parameters on the load-equalizing capacity of the bearing are analyzed. The results show that the load-equalizing capacity of the balanced beam structure is not completely uniform, and the load-equalizing capacity of the bearing decreases with the increase of the bearing load and axis inclination angle. The bearing radius of thrust bearing has a great influence on the load distribution of bearing, while the radius of connecting cylinder and the radius of supporting cylinder of lower balance beam have little effect on the load distribution of tile. For vertical shaft system, the load sharing ability and service performance of thrust bearing can be improved by reasonably controlling axis inclination.
【作者單位】： 西安交通大學現代設計及轉子軸承系統教育部重點實驗室;西安交通大學機械結構強度與振動國家重點實驗室;
【基金】：國家重點基礎研究發展計劃項目(2015CB057303) 國家科技重大專項項目(2014ZX06901023)
【分類號】：TH133.3

【相似文獻】

相關期刊論文 前8條

1 李繼堂,尚志,劉海輝;大型起重吊具—650t平衡梁設計[J];東北水利水電;2000年07期

2 張永恩;單方慶;章好民;蔣建國;秦義崇;;起重專用吊具——平衡梁的安全檢測[J];起重運輸機械;2007年01期

3 連秋菊;趙良;曾鵬;;起重機大車平衡梁裂紋有限元分析與修復處理[J];建設機械技術與管理;2011年09期

4 江華;劉龍;范東風;嚴云福;董達善;;基于BS EN1993-1-9:2005的岸邊集裝箱起重機大車平衡梁疲勞壽命評估[J];起重運輸機械;2014年03期

5 王志遠;;設備吊裝中平衡梁和吊車臂桿相對角度的精確控制[J];石油工程建設;2007年06期

6 廉書生;張鋒鋒;董達善;滕媛媛;;岸橋大車平衡梁疲勞壽命預測[J];計算機輔助工程;2011年03期

7 蘭興發;966D裝載機平衡梁的修復[J];礦山機械;2000年11期

8 蘭興發;裝載機平衡梁的修復[J];工程機械與維修;2000年10期

，

本文編號：2352170