【摘要】：為了定性與定量描述產品在產品生命周期管理(PLM)設計階段各環節信息狀態,提出通過信息熵分析設計階段各環節信息狀態的不確定性,通過信息距離分析各環節取得某個狀態所遇障礙的大小,然后采用頂層基本骨架(TBS)方法建立產品的三維模型并對其信息狀態進行分析,結果表明,客戶對產品的需求增加后,產品在設計及轉移狀態上需要的信息相應增加,通過信息狀態的分析為產品在PLM設計階段的開發過程提供信息學方面的依據。
[Abstract]:In order to describe qualitatively and quantitatively the information state of each link in product life cycle management (PLM) design stage, the uncertainty of information state in design stage is analyzed by information entropy. Through the information distance analysis, the size of the obstacles encountered in a certain state is obtained. Then the top-level basic skeleton (TBS) method is used to establish the three-dimensional model of the product and the information state is analyzed. The results show that, After the customer's demand for the product increases, the information needed in the design and transfer state of the product increases accordingly. The analysis of the information state provides the basis of informatics for the development process of the product in the PLM design stage.
【作者單位】： 上海理工大學機械工程學院;日本中央大學理工學部;
【基金】：國家自然科學基金資助項目(51375314)
【分類號】：TH122
，

本文編號：2323535