本文選題：瓶頸緩沖 + 壓件策略　； 參考：《現代制造工程》2017年10期

【摘要】：設置瓶頸緩沖對于提高制造系統穩定性和產出效率具有重要意義。針對空氣懸架制造過程中的多工件、多工序和多設備并行生產的復雜工況,根據設備故障度和維修度、在制品庫存成本、瓶頸停工損失以及異常生產波動因素等,建立了使瓶頸工序停機等件時間最短且成本損失最小的基本瓶頸緩沖量模型,并針對批量加工和壓件轉運策略造成的工序間歇進行修正。以空氣彈簧減震器機械結構關鍵零件的生產排程為例,驗證了該模型能準確預測瓶頸緩沖量。
[Abstract]:It is very important to set bottleneck buffer to improve the stability and output efficiency of manufacturing system. In view of the complex working conditions of multi-workpiece, multi-process and multi-equipment concurrent production in the air suspension manufacturing process, according to the equipment failure degree and maintenance degree, in-process inventory cost, bottleneck stoppage loss and abnormal production fluctuation factors, etc. A basic bottleneck buffer model is established, which can make the bottleneck process stop and lose the minimum cost, and the batch processing and press transfer strategy are modified. Taking the production schedule of the key parts of the mechanical structure of the air spring shock absorber as an example, it is verified that the model can accurately predict the bottleneck buffer.
【作者單位】： 江蘇科技大學機械工程學院;
【基金】：國家自然基金科學基金面上項目(51575240)
【分類號】：TH16

【相似文獻】

相關期刊論文 前1條

1 李鵬;邱順流;宋豫川;徐修文;;基于瓶頸工序的多資源多目標機械加工車間調度研究[J];現代制造工程;2013年01期

相關碩士學位論文 前1條

1 李鵬;基于瓶頸工序的多資源多目標機械加工車間排產方法與系統研究[D];重慶大學;2012年

，

本文編號：1795276