發布時間：2019-04-30 12:44

【摘要】：為研究廢舊家電產品回收庫存控制問題,構建了回收點、回收中心和回收工廠的三級回收網絡�？紤]廢舊家電產品回收時間和數量的隨機性,給出三種回收方式的回收分布;將回收中心的回收量與回收工廠的處理能力相關聯,提出了兩種不同的庫存控制策略;并以一個時間段內回收過程的平均回收費用為控制目標,建立了庫存控制模型。通過求解模型得到回收點和回收中心的最優送貨時間,及其在一個運作周期的最小平均回收費用,并可以確定回收點、回收中心和回收工廠的庫存量。最后,通過案例分析驗證了模型的有效性和可行性。
[Abstract]:In order to study the problem of recycling inventory control of used household appliances, a three-level recycling network of recycling point, recycling center and recycling plant is constructed. Considering the randomness of recycling time and quantity of waste household appliances, the distribution of three recovery methods is given, and two different inventory control strategies are put forward by correlating the recovery amount of recycling center with the disposal capacity of recycling plant. Taking the average recovery cost in a period of time as the control target, the inventory control model is established. By solving the model, the optimal delivery time of recovery point and recovery center and the minimum average recovery cost in a single operation cycle can be obtained, and the inventory of recovery point, recovery center and recycling plant can be determined. Finally, the validity and feasibility of the model are verified by a case study.
【作者單位】： 合肥工業大學機械與汽車工程學院;陜西理工學院機械工程學院;
【基金】：國家863計劃資助項目(2013AA040205)
【分類號】：F713.2;F252

【參考文獻】

相關期刊論文 前3條

1 代穎;馬祖軍;朱道立;;回收商管理庫存下逆向物流多周期LRIP[J];工業工程與管理;2010年05期

2 狄衛民;王梅杰;;回收物流系統生產庫存優化模型[J];計算機集成制造系統;2010年07期

3 黃祖慶,達慶利,王冬冬;逆向物流具有時滯的一個EOQ擴展訂貨模型[J];物流技術;2004年05期

【共引文獻】

相關期刊論文 前10條

1 楊杰;周磊山;孟，

本文編號：2468770