本文選題：生產物流　切入點：冷彎型鋼　出處：《山東大學》2014年碩士論文　論文類型：學位論文

【摘要】：企業的生產物流是企業物流的重要組成部分,一般指從客戶的訂單開始,生成物料采購計劃和生產計劃,經過采購原材料、外購件和一系列的生產工藝過程,直到產成品入庫及最終發運為止。企業生產物流設計的合理與否,直接影響企業整體的生產效率與企業成本。 但冷彎型鋼生產企業,對于技術工藝和裝備的研究很多,關于生產物流規劃方面的研究少之又少,相關先進理論在企業中的應用非常不完善由于缺乏系統的生產物流方面的規劃,多數冷彎型鋼企業投產后存在布局不合理、生產能力不匹配等問題,導致生產效率降低,規�；a(chǎn)不夠。 本文在前人對生產物流系統設計理論及方法的研究,進一步研究了系統布置方法在冷彎型鋼企業內生產物流系統設計的應用。以國內某冷彎型鋼產品生產企業LW公司為例,對冷彎型鋼企業在行業快速發展,市場競爭日趨激烈的條件下,運用系統布置設計方法,結合冷彎型鋼生產工藝的特點對企業生產物流進行系統化的規劃和設計。最后通過對冷彎型鋼企業內生產物流系統在物流管理方法的研究,對企業物流管理進行改進,取得了一定的效果。
[Abstract]:The production logistics of an enterprise is an important part of the logistics of an enterprise. Generally speaking, it refers to the generation of a material purchase plan and a production plan from the customer's order, through the purchase of raw materials, outsourced parts and a series of production processes. Until the finished product is stored and finally shipped. Whether the design of production logistics is reasonable or not directly affects the production efficiency and cost of the enterprise as a whole. However, in cold-formed steel manufacturing enterprises, there is a lot of research on technology, technology and equipment, and very little research on production logistics planning. The application of relevant advanced theories in enterprises is very imperfect. Due to the lack of systematic production logistics planning, most cold-formed steel enterprises have problems such as unreasonable layout and mismatch of production capacity after putting into production, which leads to the reduction of production efficiency. Scale production is not enough. In this paper, based on the previous research on the design theory and method of the production logistics system, the application of the system layout method in the design of the production logistics system in the cold-formed steel enterprise is further studied. Under the condition of the rapid development of the industry and the increasingly fierce market competition, the cold-formed steel enterprises apply the design method of system layout. Combined with the characteristics of cold-formed steel production process, the production logistics of enterprises is systematically planned and designed. Finally, through the research on the logistics management method of production logistics system in cold-formed steel enterprises, the logistics management of enterprises is improved. A certain effect has been achieved.
【學位授予單位】：山東大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：F426.31;F252

【參考文獻】

相關期刊論文 前8條

1 胡紅云;林希;;我國制造企業生產物流的發展現狀、問題與對策[J];重慶科技學院學報(社會科學版);2011年02期

2 姜復生,袁曉光;我國冷彎型鋼生產的特點及發展[J];鋼鐵;2000年09期

3 李慶予,黃小原,劉新宇;鋼鐵企業的生產物流管理模式研究[J];鋼鐵;2004年05期

4 羅宜美,朱紅芳,孫學慧;工業工程(第三講) 制造業生產物流系統平面布置優化設計的研究[J];工程機械;2005年11期

5 張溯,田亞軍,陳云波;冷彎型鋼廠房設計[J];鋼結構;1997年03期

6 丁國良;中國冷彎型鋼生產面臨第二次發展高潮[J];鋼結構;2004年06期

7 劉洋,謝偉平,蔡玉春;冷彎型鋼發展與應用綜述[J];鋼結構;2004年06期

8 夏文匯;我國物流管理體制的現狀、問題及對策[J];深圳大學學報(人文社會科學版);2005年04期

，

本文編號：1609484