【摘要】：為了使原狀鋰云母渣能夠在混凝土中成功應用,展開了原狀鋰云母渣加工成摻合料的制備工藝探索試驗,制備方法包括高低溫干燥和球磨機粉磨,進行加工的主要目的在于降低鋰云母渣的含水率以及降低鋰云母渣顆粒細度;同時,為了提高試驗效率,及時發現效果顯著的制備工藝,每進行一次制備加工之后緊接著進行細度測試和鋰云母渣混凝土強度試驗。根據試驗結果,確定了一種最優鋰云母渣制備工藝如下:將原狀鋰云母渣在105℃干燥箱中干燥24 h以去除游離水分,再以300℃溫度烘干2 h以去除結合水,接著在水泥球磨機內粉磨2 h,以此制備工藝制備的鋰云母渣摻合料測得其45μm篩余為5.1%,并且摻入混凝土?xí)r對混凝土抗壓強度作用顯著,其作用效應要優于粉煤灰,并且早期強度高于普通混凝土,后期強度亦與普通混凝土相當。
[Abstract]:In order to make the undisturbed spodumite slag be successfully applied in concrete, the preparation process of the raw spodumite slag was studied. The preparation methods include high and low temperature drying and ball mill grinding. The main purpose of processing is to reduce the moisture content of spodumite slag and the fineness of spodumite slag. At the same time, in order to improve the test efficiency and find out the effective preparation technology in time, the fineness test and the strength test of spodumite slag concrete were carried out immediately after each preparation process. According to the experimental results, an optimal preparation process of spodumite residue was determined as follows: the raw spodumite residue was dried in a 105 鈩，

本文編號：2384651