【摘要】：裝配式模塊結構作為典型的工業化建筑具有良好的發展和應用前景,為了獲得結構的整體性能,掌握該類結構體系特點,采用新尺寸箱體模塊,設計了7層標準戶型的裝配式模塊住宅結構,并對該結構方案建立了有限元模型,與增加輔助立柱、橫梁和設置側向輔助拉索的對比方案進行對比分析,考察不同構造措施對結構抗側剛度的影響;同時對其節點剛接和鉸接兩種不同模型進行分析,考察節點剛度對結構的性能影響,分析結果表明,增加側向輔助拉索對提高結構側向剛度作用更加明顯,節點剛度對結構性能影響較大,節點剛接能有效提高結構的抗側移剛度,改善結構的受力性能。最后給出了合理的7層裝配式模塊結構方案,為多層裝配式模塊結構的設計和應用提供了參考。
[Abstract]:As a typical industrial building, assembly module structure has a good prospect of development and application. In order to obtain the overall performance of the structure and master the characteristics of this kind of structure system, a new size box module is adopted. In this paper, a 7-storey modular housing structure is designed, and a finite element model is established for the structure, which is compared with that of adding auxiliary columns, beams and lateral auxiliary cables. The effects of different structural measures on the lateral stiffness of the structure are investigated. At the same time, two different models of joint stiffness and hinge connection are analyzed, and the effects of node stiffness on the performance of the structure are investigated. Increasing the lateral auxiliary cable has a more obvious effect on improving the lateral stiffness of the structure, and the joint stiffness has a great effect on the structure performance. The joint rigid connection can effectively improve the anti-lateral stiffness of the structure and improve the mechanical performance of the structure. Finally, a reasonable 7-layer assembly module structure scheme is given, which provides a reference for the design and application of multi-layer assembly module structure.
【作者單位】： 哈爾濱工業大學土木工程學院;哈爾濱工業大學(威海)土木工程系;大連中集物流裝備有限公司;
【基金】：中國博士后科學基金面上項目(2014M551253) 哈爾濱工業大學(威海)�？蒲谢�(HIT(WH)201321)
【分類號】：TU756

【相似文獻】

相關期刊論文 前10條

1 劉曉琴;童登國;;鋼桁連續梁節點剛度問題的研究[J];四川建筑;2010年01期

2 郭兵;雷淑忠;;梁柱節點剛度對無支撐鋼框架性能的影響[J];山東建筑大學學報;2010年03期

3 何小輝;武振宇;;節點剛度對方管空間三角形桁架動力性能的影響[J];建筑科學與工程學報;2012年01期

4 施文;;單管塔節點剛度對整塔剛度的影響[J];四川建材;2013年01期

5 張竟樂,趙金城;節點剛度對凱威特型單層球面網殼穩定性的影響[J];空間結構;2004年02期

6 吳文軍;陳軍明;馬小強;;節點剛度對鋼框架力學性能的影響分析[J];廣西工學院學報;2007年04期

7 姬若鵬;郝際平;賀程;;適用于局部雙層后張拉整體成形網殼的節點剛度分析[J];空間結構;2013年03期

8 肖e，

本文編號：2132932