本文關鍵詞： 核工業水池 反應位移法 抗震設計 地基彈簧系數 SL SL　出處：《防災減災工程學報》2016年05期 　論文類型：期刊論文

【摘要】：介紹了反應位移法的基本原理和計算方法,并在大型有限元商業軟件ANSYS中實現,將其應用于核電廠工業水池抗震設計分析,對不同工況下的工業水池的內力分布展開研究,同時通過ANSYS的二次開發并結合五點公式計算得到結構內力分布規律及其危險工況,為工業水池合理截面設計及配筋方案提供技術支持。結果表明:工業水池側墻最大彎矩發生在中間部位的中部和底部,在同等抗震等級條件下,SL1地震作用下側墻彎矩大于SL2地震作用下的;柱子內力規律性明顯,水池中間所受內力最大,SL2地震作用下變形結果大于SL1地震作用下的,空水狀態為危險工況,且采用適當?shù)呐浣畲胧┠軌驖M足結構抗震要求。該研究成果可為核電工業水池抗震設計或其他類似工程的設計提供參考。
[Abstract]:Introduces the basic principle and calculation method of displacement response method, and implemented in the large-scale finite element software ANSYS, its application in nuclear power plant industrial pond seismic design analysis, research on the distribution of internal forces under different conditions of the industrial pool, at the same time by two times the development of ANSYS and combined with five point formula and its risk condition of internal force distribution structure, provide technical support for the industrial pool reasonable section design and reinforcement scheme. The results show that the industrial pool side wall maximum moment in the middle part of the middle and bottom in the same seismic grade under earthquake action SL1 side wall bending moment is greater than SL2 under earthquake force; post obvious regularity. The middle of the pool by force maximum, SL2 earthquake deformation results more than SL1 under the action of earthquake, the state of empty water dangerous conditions, and the use of appropriate reinforcement measures to The results can provide reference for the design of the nuclear power pool and other similar projects.

【作者單位】： 大連大學土木工程技術研究與開發中心;
【基金】：地震行業科研專項經費項目(2015419014) 大連市科技計劃項目(2014E13SF145)資助
【分類號】：TU352.11
【正文快照】： 引言核能作為一種綠色的清潔能源,受到世界各國的青睞[1]。我國核電項目也在開展較大規模的建設。但是由2011年日本福島核安全事故可知,如何提高核電安全水平是重中之重。供水系統是核電廠的重要組成部分,但常作為非核級構筑物進行常規抗震設計,在發生超設計基準事故時可能遭，

本文編號：1443531