發布時間：2018-06-21 14:39

  本文選題：質量管理 + PDCA循環��； 參考：《華東理工大學》2013年碩士論文

【摘要】：當今世界,質量的重要性越來越凸顯出來,優異的質量已經成為傳統制造業競爭的核心。對于衛浴行業來說,隨著世界品牌不斷進駐中國,開拓市場,面對國內品牌的價格壓力,外資品牌在質量管理上的水平?jīng)Q定了企業在市場中的競爭力。一方面要承襲品牌的優越質量,一方面要提高產品合格率以降低制造成本,只有這樣才能以不犧牲制造成本來換取高品質,這也是外資品牌適應國內消費水平、占領國內市場的主要途徑。 本文首先從簡介水龍頭制造的過程及其特性出發,明確新產品TalisE2出現的質量現狀及原因分析,即首先介紹水龍頭本體銅合金重力鑄造、機加工、磨拋光、全自動鎳鉻合金電鍍以及成品水龍頭組裝工序的質量合格率現狀及主要原因分析；其次,在明確TalisE2各過程質量合格率現狀的基礎上,將各過程質量改進研究建立在PDCA循環之上,將改進研究的詳細內容歸納在計劃、實施、檢查、處理四個階段,從而保證了質量管理的全面性、系統性和可靠性；再次,通過各制造過程缺陷大量的分析論證,闡明改進的方向。結合各制造過程的質量合格率目標,制訂行動方案,并對實施結果與目標進行對照,評估行動方案的有效性,不斷改進產品質量。
[Abstract]:In today's world, the importance of quality has become more and more prominent, excellent quality has become the core of traditional manufacturing competition. For the sanitary ware industry, with the world brands constantly entering China, opening up the market, facing the price pressure of domestic brands, the quality management level of foreign brands determines the competitiveness of enterprises in the market. On the one hand, it is necessary to inherit the superior quality of the brand, on the other hand, it is necessary to raise the qualified rate of the products to reduce the manufacturing cost. Only in this way can the quality be exchanged for high quality without sacrificing the manufacturing cost. This is also a way for foreign brands to adapt to the domestic consumption level. The main way to occupy the domestic market. Based on the brief introduction of the process and characteristics of faucet manufacture, this paper analyzes the present quality situation and causes of the new product Talis E2, that is, the copper alloy gravity casting, machining, grinding and polishing of the tap body. The quality qualification rate of automatic Ni-Cr alloy electroplating and the assembly process of finished faucet and its main reasons are analyzed. Secondly, on the basis of clarifying the present quality qualification rate of Talis E2 process, the research of process quality improvement is established on the basis of PDCA cycle. The detailed contents of the improved research are summarized into four stages: plan, implementation, inspection and processing, so as to ensure the comprehensiveness, systematization and reliability of quality management; thirdly, through a large number of analysis and argumentation of defects in various manufacturing processes, Clarify the direction of improvement. According to the target of the quality qualified rate of each manufacturing process, the plan of action is drawn up, and the result of implementation is compared with the target, the effectiveness of the action plan is evaluated, and the product quality is continuously improved.
【學位授予單位】：華東理工大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：F273.2;F426.4

【參考文獻】

相關期刊論文 前10條

1 劉冬梅;馬濤;海振瑾;;關于工程項目質量管理PDCA循環的思考[J];產業與科技論壇;2007年10期

2 夏煥超;;PDCA循環在工程項目成本管理上的運用[J];中國建材資訊;2006年01期

3 郭同智;透視我國質量管理發展與現狀[J];科學與管理;2004年04期

4 孫秀昌;李巖冰;劉江峰;;PDCA循環在企業安全管理中的應用探討[J];中國安全生產科學技術;2008年01期

5 戴火紅;;PDCA循環在某新型鋼結構工程質量管理中的應用[J];建設監理;2009年08期

6 王大海;;績效管理中的PDCA循環[J];商場現代化;2006年32期

7 王藝;田澤;;運用管理新方法 構建新型企業質量文化[J];商場現代化;2007年18期

8 李建龍;;運用PDCA循環進行產品質量改進[J];汽車實用技術;2011年04期

9 馬成剛;;PDCA循環在工程質量管理中的應用[J];中國科技信息;2007年08期

10 李仕超,曾鳳章;項目質量管理淺析[J];中國質量;2002年10期

，

本文編號：2049076