本文選題：制造業 + 結構演變��； 參考：《江蘇師范大學》2013年碩士論文

【摘要】：制造業作為國民經濟發展的基石，是推進區域經濟高效發展的主要?jiǎng)恿�，制造業結構變動和空間分布的研究是國內外學者關注的焦點。江蘇省是我國的經濟強省和制造業大省，研究江蘇省的制造業結構變動與空間分異格局是實現區域競爭力提升和現代化建設的迫切需要。 論文首先對制造業、產業結構和產業布局的相關概念進行界定，介紹了制造業結構和空間布局的相關理論基礎；其次，在全面分析江蘇省2000年至2010年制造業產值、勞動力數量、所有制結構變化的基礎上，從制造業結構變動過程、結構競爭力、結構相似系數與專業化水平等三個方面分析江蘇省制造業結構演變過程；再次，從區域角度采用泰爾指數、空間區位基尼系數、產業集中度衡量制造業發展的區域差異和空間集聚程度，從行業角度采用絕對集中度系數研究制造業分行業主要集聚地區。此外，論文還分析了影響制造業空間格局3大因素：要素稟賦、規模經濟和制度政策，并運用多元線性回歸方法分析了制造業總體和分行業的影響因素。 研究發現江蘇省制造業結構正向高加工度化發展，制造業地域分布不平衡，蘇南地區制造業平均集中率高于蘇中、蘇北地區，制造業有向蘇中和蘇北擴散的趨勢，要素稟賦、規模經濟、制度政策影響制造業空間格局。最后，針對上述的研究結論和江蘇省制造業發展面臨的問題，，提出今后的發展對策建議，以實現制造業快速發展。
[Abstract]:As the cornerstone of national economic development, manufacturing industry is the main driving force to promote the efficient development of regional economy. The research on the structural change and spatial distribution of manufacturing industry is the focus of domestic and foreign scholars.Jiangsu Province is a strong economic province and a big manufacturing province in China. It is urgent to study the structural change and spatial differentiation pattern of manufacturing industry in Jiangsu Province in order to realize the promotion of regional competitiveness and the modernization construction.Firstly, the paper defines the related concepts of manufacturing, industrial structure and industrial layout, and introduces the theoretical basis of manufacturing structure and spatial layout. Secondly, it analyzes the manufacturing output value and the number of labor force in Jiangsu Province from 2000 to 2010.On the basis of the change of ownership structure, this paper analyzes the evolution process of manufacturing structure in Jiangsu Province from three aspects: the changing process of manufacturing structure, structural competitiveness, structural similarity coefficient and specialization level.The Gini coefficient of spatial location, the regional difference and the degree of spatial agglomeration of the development of manufacturing industry are measured by industrial concentration degree. From the angle of industry, the absolute concentration coefficient is adopted to study the main agglomeration areas of manufacturing industry in sub-industries.In addition, the paper also analyzes three factors that affect the spatial pattern of manufacturing industry: factor endowment, scale economy and institutional policy, and analyzes the overall and sub-industry factors of manufacturing industry by using multiple linear regression method.It is found that the manufacturing structure of Jiangsu Province is developing to a high degree of processing, and the regional distribution of manufacturing industry is not balanced. The average concentration rate of manufacturing industry in southern Jiangsu is higher than that in central Jiangsu, northern Jiangsu, and the manufacturing industry has the tendency of spreading to the middle and north of Jiangsu.Economies of scale and institutional policies affect the spatial pattern of manufacturing industry.Finally, in view of the above conclusions and the problems facing the development of manufacturing industry in Jiangsu Province, the countermeasures and suggestions are put forward in the future in order to realize the rapid development of manufacturing industry.
【學位授予單位】：江蘇師范大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：F427

【參考文獻】

相關期刊論文 前10條

1 吳三忙;李善同;;市場一體化、產業地理集聚與地區專業分工演變——基于中國兩位碼制造業數據的實證分析[J];產業經濟研究;2010年06期

2 劉修巖;何玉梅;;集聚經濟、要素稟賦與產業的空間分布:來自中國制造業的證據[J];產業經濟研究;2011年03期

3 肖春梅;;我國工業布局的演變特征、存在問題與優化策略[J];當代經濟研究;2011年01期

4 賈若祥,劉毅;產業競爭力比較研究——以我國東部沿海省市制造業為例[J];地理科學進展;2003年02期

5 賀燦飛;劉洋;;產業地理集中研究進展[J];地理科學進展;2006年02期

6 賀燦飛;潘峰華;;產業地理集中、產業集聚與產業集群:測量與辨識[J];地理科學進展;2007年02期

7 劉志高;尹貽梅;孫靜;;產業集群形成的演化經濟地理學研究評述[J];地理科學進展;2011年06期

8 郭來喜,陸大道;人地關系與經濟布局理論創新與突破——慶賀吳傳鈞院士80華誕[J];地理科學進展;1998年01期

9 賀燦飛;朱晟君;;制造業地理集聚的區域差異研究——江蘇和安徽對比研究[J];地理科學;2008年06期

10 陳松林;陳進棟;韋素瓊;;福建省綜合交通可達性格局及其與制造業空間分布的關系分析[J];地理科學;2012年07期

本文編號：1757546