【摘要】：隨著技術的不斷發展以及人們對空調使用的高需求,熱力膨脹閥的性能提高受到了人們的極大關注。其中感溫包的充注方式成為了關注焦點之一,感溫包充注方式對擴大熱力膨脹閥使用溫區及提高工作性能有很大的影響,但是對于感溫包充注方式的理論研究、數值計算等尚未有公開報道的文獻。不同的充注方式以及充注液組分能夠改善感溫系統的工作性能。本文對熱力膨脹閥的充注方式以及組分進行了理論研究與數值模擬計算。研究?jī)?nèi)容主要包括： (1)闡述了本文的研究背景以及熱力膨脹閥組成、作用等,簡要介紹了國內外熱力膨脹閥應用、研究現狀,以及熱力膨脹閥感溫包充注方式研究現狀等。 (2)經過理論分析,對比各種充注方式,確定液體交叉充注在各方面具有很明顯的優勢,具有很高的研究?jī)r(jià)值。 (3)采用Visual Basic語言和EES進行編制程序計算,確定感溫包充注液的組分以及各組分所占比例,對二元混合制冷劑、三元混合制冷劑的計算結果進行比較分析,確定適合的感溫包充注液組成。
[Abstract]:With the continuous development of technology and the high demand for air conditioning, the performance improvement of thermal expansion valve has received great attention. Among them, the filling mode of the temperature sensor package has become one of the focus of attention. The filling mode of the temperature sensing package has a great influence on the expansion of the use temperature zone of the thermal expansion valve and the improvement of its working performance, but the theoretical research on the temperature sensing package filling method is also discussed. Numerical calculations, etc., have not been reported publicly. The working performance of temperature sensing system can be improved by different filling methods and filling liquid components. In this paper, the filling mode and composition of thermal expansion valve are studied theoretically and numerically simulated. The main research contents are as follows: (1) the research background, composition and function of thermal expansion valve are described, and the application and research status of thermal expansion valve at home and abroad are briefly introduced. As well as the thermal expansion valve temperature-sensing filling methods and so on. (2) through theoretical analysis and comparison of various filling methods, it is determined that liquid cross-filling has obvious advantages in various aspects and has high research value. (3) using Visual Basic language and EES to program and calculate the components and the proportion of each component in the liquid filled with temperature, the calculation results of binary mixed refrigerant and ternary mixed refrigerant are compared and analyzed. Determine the suitable composition of the temperature-sensitive filling liquid.
【學位授予單位】：浙江大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TB657.2

【參考文獻】

中國期刊全文數據庫 前10條

1 葉奇f ;陳江平;;熱力膨脹閥流動噪聲試驗研究[J];低溫工程;2010年01期

2 伏龍,丁國良,張春路,仲華;螺桿式風冷冷水機組動態模型的開發及驗證[J];低溫與超導;2003年01期

3 郭群良;淺談熱力膨脹閥的選擇計算和使用方法[J];電子質量;2003年12期

4 伏龍,丁國良,張春路,仲華;風冷熱泵冷熱水機組動態過程仿真[J];工程熱物理學報;2003年05期

5 張良俊;吳靜怡;王如竹;陳鋼;;熱力膨脹閥在空氣源熱泵熱水器系統中穩定特性的實驗研究[J];工程熱物理學報;2006年S1期

6 宋建偉;汽車空調熱力膨脹閥的結構與選用[J];廣東公路交通;1997年02期

7 苑增之;王建斌;;單機多庫制冷系統中蒸發器與熱力膨脹閥及壓縮機的匹配[J];大連海運學院學報;1990年03期

8 黃新明;劉義軍;;熱力膨脹閥的正確使用與故障分析[J];廣西輕工業;2010年07期

9 黃東,袁秀玲,張波,陳蘊光;節流機構對風冷熱泵逆循環除霜性能的影響[J];哈爾濱工業大學學報;2004年05期

10 魏安;外平衡式熱力膨脹閥頂桿填料密封不良故障分析[J];航海技術;2005年04期

，

本文編號：2326841