發布時間：2018-10-20 17:05

【摘要】：耦合模態空間控制方法可以對被控系統的固有頻率、阻尼比和模態振型進行配置。針對結構低頻振動噪聲的主動控制問題,本文采用耦合模態空間控制方法將結構的振動模態控制為零體積速度模態。以矩形簡支板為例進行了結構聲輻射主動控制仿真,將板的第1階和第4階振動模態控制為零體積速度模態,結果表明,簡支板的低頻聲輻射得到了有效控制。本文提出的結構聲主動控制方法可以有效控制結構低頻振動噪聲,同時具有物理意義清楚、控制過程簡單、控制率的設計與激勵力大小和位置無關等特點。
[Abstract]:The coupled modal space control method can configure the natural frequency, damping ratio and modal mode of the controlled system. To solve the active control problem of low frequency vibration and noise of structure, the coupled modal space control method is used to control the vibration mode of the structure into zero volume velocity mode. Taking the rectangular simply supported plate as an example, the active control of structural acoustic radiation is simulated. The first and fourth order vibration modes of the plate are controlled to zero volume velocity mode. The results show that the low frequency acoustic radiation of the simply supported plate is effectively controlled. The structural acoustic active control method proposed in this paper can effectively control the low frequency vibration noise of the structure. At the same time, it has the characteristics of clear physical meaning, simple control process, and the design of control rate is independent of the magnitude and position of the excitation force.
【作者單位】： 大連理工大學工業裝備結構分析國家重點實驗室;大連理工大學船舶工程學院;
【分類號】：TB535

【相似文獻】

相關期刊論文 前10條

1 劉見華,金咸定;結構聲傳遞數值計算方法的研究進展[J];振動與沖擊;2002年04期

2 劉見華,金咸定,李U，

本文編號：2283811