再生葉蠟石-碳化硅-碳磚的研制與應用
發布時間:2018-11-20 19:00
【摘要】:為了回收利用廢葉蠟石-碳化硅-碳磚,將廢磚進行揀選并清除磚體表面鐵渣等雜物,干燥后破碎成≤7 mm顆粒,經輪碾機整形后,篩分出3~1和≤1 mm的顆粒料,然后分別以不同質量分數(20%、30%、40%)的再生葉蠟石-碳化硅-碳顆粒料等量取代葉蠟石-碳化硅-碳新磚配方中的GL-80回轉窯高鋁顆粒料,經混練、成型、干燥、煅燒后,檢測試樣的顯氣孔率、體積密度、常溫耐壓強度、燒后線變化率和抗渣侵蝕性。結果表明:1)隨著再生顆粒加入量的增加,再生磚的顯氣孔率和常溫耐壓強度變化不大,體積密度減小,燒后線變化增大,抗渣滲透性能略有提高,但抗渣侵蝕性能沒有明顯變化。2)加入40%(w)再生料的再生磚在某鐵廠100 t鐵水包壁上使用,其侵蝕速率與新磚的相當,但原料成本比新磚大幅降低。
[Abstract]:In order to recover and utilize the waste pyrophyllite, silicon carbide and carbon brick, the waste brick was sorted out and the debris such as iron slag on the surface of the brick body was removed. After drying, the particles were broken into 鈮,
本文編號:2345710
[Abstract]:In order to recover and utilize the waste pyrophyllite, silicon carbide and carbon brick, the waste brick was sorted out and the debris such as iron slag on the surface of the brick body was removed. After drying, the particles were broken into 鈮,
本文編號:2345710
本文鏈接:http://sikaile.net/guanlilunwen/chengjian/2345710.html
最近更新
教材專著