自保溫型加氣混凝土砌塊的研究
發布時間：2018-10-26 08:07
【摘要】：隨著資源日益匱乏及大量固體污染廢棄物的產生，如何降低建筑能耗、提高建筑節能標準并實現廢棄資源再利用，已經成為一個熱點話題。隨著建筑節能的深入，現有的普通蒸壓加氣混凝土已經很難滿足65%的建筑節能標準，這也為自保溫型加氣混凝土砌塊的研究提供了廣闊空間。 自保溫型加氣混凝土砌塊即通過對現有的低端加氣混凝土進行技術升級，所制備的低容重、高強度及低導熱系數的高性能加氣混凝土。由該新型建筑材料所砌筑的外墻建筑體系可在不依托其它保溫材料的基礎上，達到建筑節能65%的標準。 本文以礦渣微粉、水泥及油頁巖灰為主要原材料制備B03級自保溫型加氣混凝土砌塊。本試驗通過研究原材料對蒸壓加氣混凝土性能的影響，并結合正交試驗分析結果確定了主要原材料的配合比。在此基礎上，本文還采用不同的激發處理方式來優化其性能，并結合SEM掃描電鏡照片、XRD圖譜和導熱系數測定等手段，研究分析了相關的激發機理及其對加氣混凝土微觀結構、水化產物、強度和導熱系數的影響。 研究成果如下： 1、本文所用的礦渣微粉是一種活性較高的礦物，其28d活性指數可達95%。油頁巖灰為主要的硅質材料，可為水熱合成反應提供充足的SiO2，生成有利于加氣混凝土強度提高的水化硅酸鈣等水化產物。適量摻入礦渣微粉和油頁巖灰可顯著改善坯體和加氣混凝土的性能。 2、通過正交試驗研究確定了較優的原材料配合比及主要工藝參數：油頁巖灰35%，礦渣微粉25%，水泥40%，料漿溫度35℃，雙氧水4.0%，水料比0.60，穩泡劑A0.09%。 3、通過機械粉磨的方式對油頁巖灰進行磨細處理，可有效改善物料的顆粒級配并激發其活性，顯著提高加氣混凝土的性能。研究表明，油頁巖灰較適宜的機械粉磨時間為20min。 4、本文對比研究了三乙醇胺、硫酸鈉和硅酸鈉三種化學激發劑對加氣混凝土性能的影響，其激發效果次序：硅酸鈉硫酸鈉三乙醇胺。其中，硅酸鈉化學外加劑對加氣混凝土性能的影響最顯著，，而且，它還具有穩定雙氧水的作用，可有效降低坯體的發氣膨脹速率，優化孔結構。 5、本文對比研究了天然石膏、氟石膏和磷石膏三種礦物外加劑對加氣混凝土性能的影響。氟石膏和磷石膏對加氣混凝土的激發效果與天然石膏相似，其中磷石膏的激發效果最好。 6、采用物理激發與摻加礦物外加劑相結合的方式所制備自保溫型加氣混凝土砌塊的各性能較優：容重282kg/m3，抗壓強度1.52MPa，導熱系數0.0779W/(m·K)。 7、本文對廢棄加氣混凝土砌塊的基本性質及其應用于加氣混凝土的可行性進行了研究，通過對比試驗考查了其對加氣混凝土性能的影響，為廢砌塊的資源化再利用提供了一定的參考數據。研究表明，適量的廢砌塊可起到晶種的作用，促進水熱合成反應的進行，在一定程度上有利于材料性能的提高。
[Abstract]:With the increasing shortage of resources and the production of a large number of solid pollution wastes, how to reduce building energy consumption, improve building energy conservation standards and realize the reuse of waste resources has become a hot topic. With the development of building energy saving, it is difficult for the existing ordinary autoclaved aerated concrete to meet the 65% building energy saving standard, which also provides a wide space for the study of self-insulating aerated concrete blocks. The self-insulating aerated concrete block is the high performance aerated concrete with low bulk density, high strength and low thermal conductivity by upgrading the existing low-end aerated concrete. The building system built by this new building material can reach the standard of building energy saving 65% without relying on other thermal insulation materials. In this paper, B03 self-insulating aerated concrete block is prepared by using slag powder, cement and oil shale ash as main raw materials. The effect of raw materials on the properties of autoclaved aerated concrete was studied, and the mix ratio of main raw materials was determined by combining with the results of orthogonal test. On this basis, different excitation methods are adopted to optimize its performance. Combining with SEM scanning electron microscope photos, XRD spectra and thermal conductivity measurement, the related excitation mechanism and microstructure of aerated concrete are studied and analyzed. Effects of hydration products, strength and thermal conductivity. The results are as follows: 1. The slag powder used in this paper is a mineral with high activity, and its activity index can reach 95% in 28 days. Oil shale ash is the main siliceous material, which can provide sufficient SiO2, for hydrothermal synthesis to produce hydrated products such as calcium silicate hydrated to improve the strength of aerated concrete. Proper addition of slag powder and oil shale ash can improve the properties of billet and aerated concrete. 2. Through the orthogonal test, the optimum mix ratio of raw materials and main technological parameters were determined: oil shale ash 35, slag powder 25, cement 40, slurry temperature 35 鈩
本文編號：2295096
[Abstract]:With the increasing shortage of resources and the production of a large number of solid pollution wastes, how to reduce building energy consumption, improve building energy conservation standards and realize the reuse of waste resources has become a hot topic. With the development of building energy saving, it is difficult for the existing ordinary autoclaved aerated concrete to meet the 65% building energy saving standard, which also provides a wide space for the study of self-insulating aerated concrete blocks. The self-insulating aerated concrete block is the high performance aerated concrete with low bulk density, high strength and low thermal conductivity by upgrading the existing low-end aerated concrete. The building system built by this new building material can reach the standard of building energy saving 65% without relying on other thermal insulation materials. In this paper, B03 self-insulating aerated concrete block is prepared by using slag powder, cement and oil shale ash as main raw materials. The effect of raw materials on the properties of autoclaved aerated concrete was studied, and the mix ratio of main raw materials was determined by combining with the results of orthogonal test. On this basis, different excitation methods are adopted to optimize its performance. Combining with SEM scanning electron microscope photos, XRD spectra and thermal conductivity measurement, the related excitation mechanism and microstructure of aerated concrete are studied and analyzed. Effects of hydration products, strength and thermal conductivity. The results are as follows: 1. The slag powder used in this paper is a mineral with high activity, and its activity index can reach 95% in 28 days. Oil shale ash is the main siliceous material, which can provide sufficient SiO2, for hydrothermal synthesis to produce hydrated products such as calcium silicate hydrated to improve the strength of aerated concrete. Proper addition of slag powder and oil shale ash can improve the properties of billet and aerated concrete. 2. Through the orthogonal test, the optimum mix ratio of raw materials and main technological parameters were determined: oil shale ash 35, slag powder 25, cement 40, slurry temperature 35 鈩
本文編號：2295096
本文鏈接：http://sikaile.net/guanlilunwen/chengjian/2295096.html
教材專著
