發布時間：2018-05-24 09:48

  本文選題：制造業 + 產業集聚��； 參考：《四川師范大學》2017年碩士論文

【摘要】：我國東西部地區經濟發展水平差異明顯,因此,2000年我國提出西部大開發政策,在不影響東部地區經濟發展的基礎上,促進西部地區的經濟發展,縮小二者之間的差異,但促進效果不明顯。本文選取東部地區和西部地區制造業產業為研究對象,在產業聚集理論的基礎上,首先,分析了東部地區和西部地區制造業的集聚的現狀,計算了東部地區和西部地區制造業產業的集聚指數,對比分析了東西部地區制造業產業的集聚差距。其次,利用Eviews對制造業集聚度與經濟增長進行相關性分析,發現制造業產業集聚度越高對經濟增長的拉動作用越大,從而得出,西部地區經濟增長緩慢的原因在于西部地區制造業產業集聚度低。再次,對影響制造業產業集聚的因素進行分析,利用灰色關聯度,計算這些因素對制造業產業集聚的影響程度,得出影響制造業產業集聚程度大小的因素分別為市場需求、行業勞動密集度、外商直接投資、基礎設施、人力資本。最后,提出促進西部地區制造業產業集聚的政策建議。
[Abstract]:The level of economic development in the eastern and western regions of China is obviously different. Therefore, in 2000, China put forward the policy of developing the western region on a large scale, which will, on the basis of not affecting the economic development of the eastern region, promote the economic development of the western region and narrow the difference between the two. But the promotion effect is not obvious. Based on the theory of industrial agglomeration, this paper firstly analyzes the present situation of manufacturing agglomeration in eastern and western regions. The industrial agglomeration index of manufacturing industry in eastern and western regions is calculated, and the gap of manufacturing industry agglomeration in eastern and western regions is compared and analyzed. Secondly, using Eviews to analyze the correlation between manufacturing agglomeration and economic growth, it is found that the higher the concentration of manufacturing industry is, the greater the pull effect on economic growth is. The reason for the slow economic growth in the western region lies in the low concentration of manufacturing industries in the western region. Thirdly, the factors influencing the industrial agglomeration of manufacturing industry are analyzed, and the influence degree of these factors on the industrial agglomeration of manufacturing industry is calculated by using grey correlation degree, and the factors affecting the degree of industrial agglomeration of manufacturing industry are market demand, respectively. Industry labor intensity, foreign direct investment, infrastructure, human capital. Finally, the paper puts forward some policy suggestions to promote manufacturing industry agglomeration in western China.
【學位授予單位】：四川師范大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：F427

【參考文獻】

相關期刊論文 前10條

1 李瑛;;中國東部沿海地區制造業集聚動力機制分析[J];合作經濟與科技;2014年23期

2 張水峰;黃峰巖;金兆懷;;我國產業聚集與經濟增長因果關系研究——基于1998—2010年面板數據的實證分析[J];江西社會科學;2012年05期

3 趙偉;鄭雯雯;;生產性服務業-貿易成本與制造業集聚:機理與實證[J];經濟學家;2011年02期

4 雷鵬;;制造業產業集聚與區域經濟增長的實證研究[J];上海經濟研究;2011年01期

5 周明;李宗植;;地區工業集聚的新經濟地理學研究——基于省際面板數據的實證分析[J];科技進步與對策;2009年11期

6 薛艷;;產業集聚水平測度方法的實證研究[J];統計教育;2009年02期

7 劉斯敖;;產業集聚測度方法的研究綜述[J];商業研究;2008年11期

8 喬彬;李國平;楊妮妮;;產業聚集測度方法的演變和新發展[J];數量經濟技術經濟研究;2007年04期

9 劉春霞;;產業地理集中度測度方法研究[J];經濟地理;2006年05期

10 路江涌;陶志剛;;中國制造業區域聚集及國際比較[J];經濟研究;2006年03期

，

本文編號：1928606