【摘要】：隨著國內核電事業的發展,需要開發具有自主知識產權的百萬千瓦級核電汽輪發電機。作為發電機的關鍵部件,定子鐵心的壓緊質量直接影響發電機的運行安全性和使用壽命。本文基于有限元分析結合現場試驗,探索如何提高定子鐵心的壓緊質量。針對各種定子鐵心端部結構型式和齒壓板內傾量,基于ANSYS軟件分析了鐵心端部結構的剛度和強度,從而明確了鐵心內部壓力的分布狀況。有限元分析表明當鐵心端部結構采用型式Ⅲ、齒壓板內傾量采用2.0mm時,既能發揮出齒壓板的強度極限,又能使鐵心內部壓力分布均勻,從而保證定子鐵心的壓緊質量。工裝壓緊結構的有限元分析表明,在分塊壓板處增加工裝支撐結構,可降低齒壓板應力,增強鐵心階梯段的齒部壓力,從工藝上保證了定子鐵心的壓緊質量。通過現場實際測量產品的齒壓板變形量,測量值與預測值基本吻合,各次加壓時測量的數據穩定,證明對齒壓板采取的理論預補償是有效的。本文研究成果已經應用于百萬千瓦級核電項目,從機理上保證了定子鐵心的壓緊質量和運行可靠性。
[Abstract]:With the development of domestic nuclear power industry, it is necessary to develop millions of kilowatt class nuclear turbine generators with independent intellectual property rights. As a key component of generator, the quality of stator core compaction directly affects the safety and service life of generator. Based on finite element analysis and field test, this paper explores how to improve the compaction quality of stator core. The stiffness and strength of the core end structure are analyzed based on the ANSYS software for various stator core end structure types and the inner dip of the tooth press plate, and the distribution of the inner pressure of the core is clarified. The finite element analysis shows that when the end structure of the core adopts type 鈪，

本文編號：2395784