本文選題：Windows　切入點：CE　出處：《廣西大學》2013年碩士論文

【摘要】：數控系統是數控機床技術的核心。傳統的數控系統是一個封閉體系的結構系統,其通用性差、難移植性且無法實現網絡化管理；而基于通用PC數控技術也存在系統資源無法充分利用、硬件結構無法很好地滿足實時性要求、沒有現成的數控系統硬件模塊等問題。 針對上述問題,提出對基于WindowsCE的嵌入式系統關鍵技術進行研究。利用其集成度高、體積小、易擴展等特點,開發一款具有自主知識產權的嵌入式數控系統,以滿足實時性和通用性要求。并在系統中加入錯誤檢查與實時仿真功能,使系統操作方便和具有可視化。論文主要研究內容包括： 1.對嵌入式數控系統的功能需求進行分析,確定其系統的總體架構。為滿足數控系統多任務、強實時的要求,對數控系統的硬件平臺進行設計,并對上下位控制器進行選型。針對其需實現的各項功能設計專門的數控系統軟件系統,并完成了對應軟件系統的開發。 2.設計譯碼模塊和刀具補償模塊。采用編譯的方式實現對數控程序進行譯碼,調用譯碼模塊中的錯誤檢查模塊對讀入的數控程序進行分離和詞法、語法的檢查,并針對復雜的數控程序中調用子程序的情況設計相應的子程序錯誤與譯碼模塊,以擴展軟件的處理能力；刀補模塊使用平面C功能刀補算法對實際加工中所遇到的輪廓偏移進行計算,簡化加工程序的編寫。 3.通過實例驗證開發的數控系統譯碼與刀補模塊。 論文結尾部分對本數控系統存在的問題進行總結,并提出其需改進與完善的工作。
[Abstract]:Numerical control system is the core of NC machine tool technology. The traditional CNC system is a closed structure system, its universality is poor, it is difficult to transplant and can not realize network management. Based on the general PC numerical control technology, the system resources can not be fully utilized, the hardware structure can not meet the real-time requirements, there are no ready-made CNC system hardware modules and so on. Aiming at the above problems, this paper puts forward the research on the key technology of embedded system based on WindowsCE. Based on its characteristics of high integration, small volume and easy to expand, an embedded NC system with independent intellectual property rights is developed. In order to meet the requirements of real-time and generality, error checking and real-time simulation are added to the system, which makes the system easy to operate and visual. The main contents of this thesis are as follows:. 1. The functional requirements of embedded CNC system are analyzed, and the overall architecture of the system is determined. In order to meet the multi-task and strong real-time requirements of CNC system, the hardware platform of CNC system is designed. The software system of numerical control system is designed according to its functions, and the corresponding software system is developed. 2. The decoding module and tool compensation module are designed. The NC program is decoded by compiling method, the error checking module in the decoding module is called to separate the NC program read in and the lexical and grammatical checking is carried out. The subroutine error and decoding module are designed to expand the processing ability of the software. The cutter compensation module uses plane C function cutter compensation algorithm to calculate the contour offset encountered in the actual machining, which simplifies the programming of the machining program. 3. The decoding and cutter compensation module of NC system is verified by an example. At the end of the paper, the problems of the CNC system are summarized, and the work to be improved is put forward.
【學位授予單位】：廣西大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：TG659

【參考文獻】

相關期刊論文 前7條

1 王卓 ,包杰;嵌入式Linux系統及其應用前景[J];單片機與嵌入式系統應用;2004年05期

2 杜家熙;刀具半徑補償中的過切處理[J];機床與液壓;2004年06期

3 安虎平;;數控加工刀尖圓弧半徑補償原理及刀補指令使用技巧[J];機械研究與應用;2007年04期

4 孟健 ,劉建輝;基于μC/OS-II的嵌入式數控系統分析與設計[J];微計算機信息;2005年22期

5 雷鳴;劉其洪;黎鵬;徐文斌;;基于Windows CE的數控軟件開發與實現[J];微計算機信息;2008年31期

6 蔣薏,李莉,周希國;基于面向對象的開放式全軟件數控系統的實現[J];現代制造工程;2005年01期

7 CHEN Youdong;WANG Tianmiao;;Three-dimensional Tool Radius Compensation for Multi-axis Peripheral Milling[J];Chinese Journal of Mechanical Engineering;2013年03期

，

本文編號：1697830