本文選題：阿苯達唑 + 納米混懸液��； 參考：《中國藥房》2015年25期

【摘要】：目的:優化阿苯達唑納米混懸液的凍干工藝,制備阿苯達唑納米微粉。方法:采用冷凍干燥法,以粒徑、Zeta電位為指標,對預凍溫度和凍干保護劑的種類、配比及質量分散進行單因素試驗考察及驗證,將液相沉淀法制備的阿苯達唑納米混懸液,制備成阿苯達唑納米微粉。結果:預凍溫度為-20℃、凍干保護劑為4%葡萄糖-甘露醇(3∶7)時,所制納米微粉的平均粒徑為(208.03±2.13)nm,平均Zeta電位為(-15.53±0.18)m V。結論:該凍干工藝可制得粒徑、電位較優的阿苯達唑納米微粉。
[Abstract]:Objective: to optimize the freeze-drying process of albendazole nano-suspension to prepare albendazole nanometer powder. Methods: using freezing drying method and particle size Zeta potential as the index, single factor experiment was carried out to investigate and verify the pre-freezing temperature and the dispersion of freeze-dried protectants. The albendazole nano-suspension prepared by liquid phase precipitation method was used to prepare albendazole nano-suspension. Albendazole nanometer powder was prepared. Results: when the pre-freezing temperature was -20 鈩，

本文編號：2036993