發布時間：2018-04-03 22:43

  本文選題：納米鉭　切入點：多孔　出處：《南方醫科大學學報》2014年06期

【摘要】：目的運用激光熔覆技術制備新型納米鉭-鈦合金棒并研究其結構特征及生物相容性,為臨床選用內固定提供依據。方法以納米級鉭粉(Ta,Tantalum)為原料,利用激光熔覆技術制備兩側具有對稱納米鉭涂層的新型鈦合金棒。SEM觀察微觀界面結構、測量孔隙直徑并分析金相成分。采用MTT細胞毒性試驗和ALP活性檢測評價新型納米鉭-鈦合金對MC3T3-E1細胞增殖和分化性能的影響。結果掃描電鏡下觀察到試樣的Ta涂層表面呈粗糙多孔結構,鉭粉顆粒間致密熔融,孔隙直徑平均在200~300μm之間,加工過程前后成分一致;成分分析結果顯示熔覆過程并未產生新的元素。兩組材料皆可明顯促進MC3T3-E1細胞增值,但新型納米鉭-鈦合金性能更為優異,同時能夠促進成骨細胞的骨化,差異具有統計學意義。結論激光熔覆技術可成功實現鉭與醫用鈦合金的冶金結合,并使其擁有良好的表面結構和生物相容性。
[Abstract]:Objective to prepare new nano tantalum-titanium alloy rod by laser cladding and to study its structure and biocompatibility so as to provide evidence for clinical selection of internal fixation.Methods A new titanium alloy rod with symmetrical nano-tantalum coating on both sides was prepared by laser cladding technique. The microstructure of the interface was observed, pore diameter was measured and metallographic composition was analyzed.MTT cytotoxicity test and ALP activity test were used to evaluate the effect of new nano tantalum titanium alloy on proliferation and differentiation of MC3T3-E1 cells.Results under scanning electron microscope, the surface of Ta coating showed rough porous structure, dense melt between tantalum powder particles, the average pore diameter was between 200 ~ 300 渭 m, and the composition of Ta coating was the same before and after processing.The results of composition analysis showed that no new elements were produced in the cladding process.Two groups of materials can obviously promote the proliferation of MC3T3-E1 cells, but the new nano-tantalum titanium alloy has better properties and can promote osteoblast ossification, the difference is statistically significant.Conclusion the laser cladding technique can successfully realize the metallurgical bonding of tantalum with medical titanium alloy and make it have good surface structure and biocompatibility.
【作者單位】： 南方醫科大學南方醫院脊柱骨科;蘇州大學激光加工中心;
【基金】：國家自然科學基金(81272022) 南方醫科大學南方醫院2010年度院長基金(2010A002)~~
【分類號】：R318.08

【參考文獻】

相關期刊論文 前10條

1 王子旺，儲雙杰，王浩偉，李賀軍;碳／碳復合材料活塞的制造與性能[J];材料開發與應用;1996年01期

2 張文彥;奚正平;方明;李亞寧;李廣忠;張龍;;納米孔結構金屬多孔材料研究進展[J];稀有金屬材料與工程;2008年07期

3 相s，

本文編號：1707238