本文選題：PLC + MCGS　； 參考：《杭州電子科技大學》2015年碩士論文

【摘要】：隨著養豬業的發展,實現養豬的規模化、科學化成為我國養豬業實現跨越式發展的關鍵。本文根據我國養豬業的發展現狀,提出生豬的自動化飼喂控制系統的設計。整個系統有由下位機操作子系統和上位機控制子系統兩部分組成。下位機操作子系統主要實現飼喂機的自動運行、食槽的定位、食槽加料等自動化操作及無線遙控、上位機控制等手動操作。上位機控制子系統主要用于對下位機的監控,在上位機觸摸屏上顯示飼喂機的運行狀態、設置飼喂機系統的相關參數及手動控制等操作,同時可以通過無線通信在遠程計算機上對系統實現監控。下位機操作子系統主要包括飼喂機的軟件及硬件設計。以S7-200 PLC為控制核心,同時擴展無線遙控、電機驅動器、光電開關等模塊;在STEP7 Micro/WIN開發環境中編寫控制器相關的應用程序,實現系統的控制功能。上位機控制子系統由MCGS觸摸屏與計算機組成,在觸摸屏上采用MCGS組態軟件,在計算機上使用組態王軟件,設計相關的界面對系統的運行狀態進行監控并顯示,同時設計不同的界面用于進行控制參數的設置、上位機控制等,實現對系統的監測與控制。目前,飼喂系統已經在養殖現場進行安裝調試和運行,測試結果表明系統達到設計的相關要求,系統滿足使用者的需求。
[Abstract]:With the development of the pig industry, the realization of the scale of pig raising, scientific become the key to realize the leapfrog development of the pig industry in our country. According to the development of pig industry in China, the design of automatic feed control system for live pigs is put forward in this paper. The whole system consists of two parts: the lower computer operation subsystem and the upper computer control subsystem. The operation subsystem of lower machine mainly realizes the automatic operation of feeding machine, the positioning of feeding slot, the automatic operation of feeding trough and wireless remote control, the manual operation of upper computer control and so on. The upper computer control subsystem is mainly used to monitor the lower computer. The operation state of the feeding machine is displayed on the upper computer touch screen, and the related parameters of the feeding machine system and manual control are set up. At the same time, the system can be monitored by wireless communication on remote computer. The operating subsystem of lower machine mainly includes the software and hardware design of feed machine. Taking S7-200 PLC as the control core and extending the modules such as wireless remote control, motor driver, optoelectronic switch and so on, the controller related application program is written in the STEP7 Micro/WIN development environment to realize the control function of the system. The upper computer control subsystem is composed of MCGS touch screen and computer. The MCGS configuration software is used on the touch screen and the configuration king software is used on the computer. The related interface is designed to monitor and display the running state of the system. At the same time, different interfaces are designed for setting the control parameters and controlling the upper computer, so as to realize the monitoring and control of the system. At present, the feed system has been installed and debugged in the breeding site. The test results show that the system meets the design requirements and meets the needs of the users.
【學位授予單位】：杭州電子科技大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：S817.3;TP277

【參考文獻】

相關期刊論文 前2條

1 王樹東;唐偉強;;基于觸摸屏和PLC的行車控制系統設計與應用[J];電氣自動化;2007年04期

2 岳隆耀;;美國養豬業發展方式轉變和啟發[J];中國豬業;2013年S2期

，

本文編號：1852060