【摘要】：干熄焦技術是目前國內外冶金行業最先進的熄焦技術,干熄焦與濕熄焦相比在提高焦炭質量、改善環境、回收能源方面存在很大的優勢,目前干熄焦作為冶金行業比較重要的節能和環保技術得到了廣泛認可,在國內外得到了廣泛應用。受干熄爐內部分耐火材料使用壽命的限制,必須定期對干熄爐進行停爐檢修。通常干熄爐每隔1.5年左右檢修一次,每次檢修歷時30天左右,這不僅浪費了大量的人力、物力、財力,同時給高爐生產帶來不便。本論文總結了干熄爐的主要結構,概括了干熄爐系統的易損部位,對干熄爐內耐火材料損壞原因進行分析,對干熄爐內耐火材料的使用情況及研究進展進行介紹,總結了國內延長干熄爐斜道區使用壽命的相關方法。本論文結合包鋼125t/h干熄焦裝置的技術特點并對其歷年檢修進行統計分析,發現干熄爐斜道區牛腿的損壞是影響包鋼干熄焦年修周期的主要因素,其次是一次除塵器內部耐火材料的損壞;對干熄爐內使用的耐火材料的理化性能進行試驗測定,得出這部分耐火材料各項理化指標均達到設計要求;將氮化硅結合碳化硅磚這一新型耐火材料與傳統碳化硅磚的理化性能進行對比分析,得出氮化硅結合碳化硅磚理化指標綜合性能明顯好于碳化硅磚;氮化硅結合碳化硅磚在包鋼125 t/h干熄焦裝置年修過程中成功應用于斜道區牛腿部位,有效延長了牛腿的使用壽命;同時在包鋼2號干熄焦裝置年修過程中成功對干熄爐及一次除塵器關鍵部位進行改進,對檢修過程遇到的實際問題予以解決,為延長其使用壽命提供保障;結合包鋼2號干熄焦裝置斜道區損壞形式對斜道區進行受力分析,得出牛腿磚損壞主要是其受剪應力及在升溫降溫過程中牛腿拱水平環向產生拉應力所致,同時給出相應解決方案;通過對干熄焦氣體循壞系統關鍵部件的改進,有效延長了這些部件的使用壽命;通過優化干熄焦相關生產操作保障干熄焦系統穩定;最后,通過介紹在線和停爐兩種方式對包鋼干熄爐內部耐火材料進行檢查,實現了包鋼干熄焦裝置的年修周期顯著延長。這些,為有效延長干熄爐系統年修周期提供實踐經驗和理論依據。
[Abstract]:Dry coke quenching is the most advanced coke quenching technology in metallurgical industry at home and abroad. Compared with wet coke quenching, dry quenching has great advantages in improving coke quality, improving environment and recovering energy. At present, as an important energy saving and environmental protection technology in metallurgical industry, coke dry quenching has been widely recognized and widely used at home and abroad. Limited by the service life of some refractories in the dry quenching furnace, the dry quenching furnace must be shut down and overhauled regularly. The dry quenching furnace is usually overhauled once every 1.5 years, which lasts about 30 days, which not only wastes a lot of manpower, material and financial resources, but also brings inconvenience to the production of blast furnace. This paper summarizes the main structure of the dry quenching furnace, summarizes the vulnerable parts of the dry quenching furnace system, analyzes the causes of the damage of the refractory material in the dry quenching furnace, and introduces the usage and research progress of the refractory material in the dry quenching furnace. The related methods for prolonging the service life of ramp section of dry quenching furnace in China are summarized. This paper combines the technical characteristics of 125t/h dry coke quenching device in Baotou Iron and Steel Co., Ltd, and makes a statistical analysis of its maintenance over the years. It is found that the damage of the corbel leg in the ramp area of the dry quenching furnace is the main factor affecting the annual repair period of the dry coke quenching unit in Baotou Iron and Steel Co. Secondly, the damage of refractory material inside the primary dust collector; The physical and chemical properties of the refractories used in the dry quenching furnace were tested, and the results showed that all the physical and chemical indexes of the refractories met the design requirements. The physical and chemical properties of silicon nitride bonded silicon carbide brick are compared with that of traditional silicon carbide brick. The comprehensive properties of silicon nitride bonded silicon carbide brick are obviously better than that of silicon carbide brick. Silicon nitride combined with silicon carbide brick was successfully used in the annual repair of 125t / h dry coke quenching unit in Baotou Iron and Steel Co. At the same time, the key parts of dry quenching furnace and primary dust collector are improved successfully in the annual repair process of No.2 coke quenching unit of Baotou Iron and Steel Co., and the practical problems encountered in the maintenance process are solved to provide guarantee for prolonging its service life. Combined with the damage form of ramp of No.2 coke quenching device of Baotou Iron and Steel Co., the stress analysis of the ramp area is carried out. It is concluded that the damage of the corbel brick is mainly caused by shear stress and the horizontal tensile stress of the corbel arch in the process of heating and cooling. At the same time, the corresponding solutions are given. By improving the key components of the system, the service life of these components is effectively prolonged, and the stability of the coke quenching system is ensured by optimizing the production operation of the coke quenching system. Finally, the internal refractories of Baotou Iron and Steel Co., Ltd are inspected by on-line and shutdown methods. The annual repair period of Baotou Iron and Steel Co. These provide practical experience and theoretical basis for effectively prolonging the annual repair period of dry quenching furnace system.
【學位授予單位】：內蒙古科技大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TQ520.5

【相似文獻】

相關期刊論文 前10條

1 ;一種干熄爐專用供氣裝置[J];燃料與化工;2011年04期

2 張麗珠;畢延林;黃德立;;干熄爐的數值模擬分析[J];金屬世界;2012年02期

3 趙景;廖在明;;干熄爐環形風道結構改造與探索[J];燃料與化工;2014年02期

4 王英波,劉華飛,馮妍卉,張欣欣,吳懋林,王荻楠,鄭文華,于振東,徐列;對干熄爐內壓降的研究[J];燃料與化工;2003年05期

5 孔寧,溫治,馮俊小,王琴,王德,程樂意,夏紅波,王偉民,沈元林,張永慶;干熄爐內流動與傳熱過程數學模型的研究[J];冶金自動化;2004年03期

6 王亮,劉華飛,張欣欣;基于自動控制概念的干熄爐傳熱一維模型[J];燃料與化工;2004年05期

7 寧述芹,董旭東;干熄爐預存段壓力的調節與控制[J];燃料與化工;2005年03期

8 夏q，

本文編號：2393659