【摘要】：采用氣固兩相流雙噴嘴霧化水冷法制備出球形、近球形的磁性磨料,并用場發射掃描電子顯微鏡(FESEM)和能譜儀(EDS)分別進行磁性磨料表面形貌的觀察和表面元素的定量定性分析,在XK7136C型數控銑床平面磁力研磨裝置上進行研磨性能分析。結果表明:氣固兩相流雙噴嘴霧化水冷法制備的球形磁性磨料具有良好的研磨光整效果,磁性磨料在使用40 min后仍然具有良好的精密光整加工能力。
[Abstract]:Spherical and near spherical magnetic abrasives were prepared by gas-solid two-phase flow double nozzle atomization water cooling method. The surface morphology of magnetic abrasive and the quantitative and qualitative analysis of surface elements were carried out by field emission scanning electron microscope (FESEM) and energy dispersive spectrometer (EDS), respectively. The grinding performance was analyzed on the plane magnetic grinding device of XK7136C NC milling machine. The results show that the spherical magnetic abrasive prepared by gas-solid two-phase flow double nozzle atomization water cooling method has good grinding and finishing effect, and the magnetic abrasive still has good precision finishing ability after using 40 min.
【作者單位】： 山東理工大學精密制造與特種加工山東省重點實驗室;
【基金】：國家自然科學基金資助項目(51375285) 山東省重點研發計劃項目(2016GGX103001)
【分類號】：TG73

【相似文獻】

相關期刊論文 前1條

1 吳均煥;;噴霧潤滑冷卻裝置[J];機械工人;1987年07期

，

本文編號：2488593