【摘要】：將六硝基六氮雜異伍茲烷(CL-20)的濾液加入到反溶劑中,析出少量的晶體,起到類似"晶種"的作用,二次快加大量反溶劑使析出的晶體沿"晶種生長"以制備大顆粒圓滑ε-CL-20。分析了反溶劑體積和攪拌速率對ε-CL-20形貌和粒度的影響。對結晶后的ε-CL-20性能進行了表征。結果表明,與原料相比,采用這種方法制備出的ε-CL-20的晶體顆粒,具有表面圓滑、無尖銳棱角、高致密、粒度分布窄的特點。ε-CL-20的特性落高H_(50)從25 cm提高到40 cm,摩擦感度從96%降到32%,密度從2.0367 g·cm~(-3)提高到2.0384 g·cm~(-3)。
[Abstract]:The filtrate of CL-20 was added to the antisolvent and a small amount of crystals were precipitated, which acted as "seed". Growth of precipitated crystals along "seed" by adding a large amount of Anti-solvent in the second time to prepare large particles of smooth 蔚-CL-20. The effects of antisolvent volume and stirring rate on the morphology and particle size of 蔚-CL-20 were analyzed. The properties of 蔚-CL-20 after crystallization were characterized. The results show that the crystal particles of 蔚-CL-20 prepared by this method have the advantages of smooth surface, no sharp angle and high density, compared with the raw materials. The characteristic height H50 of 蔚-CL-20 increases from 25 cm to 40 cm, and the friction sensitivity decreases from 96% to 32%, and the density increases from 2.0367 g cm~ (- 3) to 2.0384 g cm~ (- 3).
【作者單位】： 北京理工大學機電學院;
【基金】：國家自然科學基金資助(11172042)
【分類號】：TQ560.1

【相似文獻】

相關期刊論文 前6條

1 張海霞;王潔欣;王立新;趙宏;邵磊;陳建峰;;反溶劑沉淀法制備阿托伐他汀鈣微粉[J];化工學報;2008年12期

2 趙敏;;一種芳烴橡膠油的制備方法[J];橡膠工業;2013年11期

3 柴濤,張景林;混合炸藥造型粉的超臨界流體反溶劑過程制備[J];華北工學院學報;2005年04期

4 朱康;李國平;羅運軍;;超臨界CO_2反溶劑法制備CL-20超細微粒[J];含能材料;2012年04期

5 馮佰強;趙健;;用超臨界CO_2反溶劑在GO表面誘導PEG的結晶[J];現代塑料加工應用;2014年01期

6 ;[J];;年期

，

本文編號：2460711