【摘要】：以熱固性酚醛樹脂為炭前驅體,經過靜電紡絲法得到納米纖維,對納米纖維氈固化完成后,以KOH為活化劑、熔鹽作為介質在高溫下對納米炭纖維造孔。結果表明,在熔鹽介質中加入少量KOH可以使孔體積和比表面積有很大的提高,孔結構得到改善。當活化溫度為800℃時,樣品的電化學性能最高(288 F/g,0.2 A/g)。
[Abstract]:Nanofibers were prepared by electrostatic spinning with thermosetting phenolic resin as carbon precursor. After curing the nano-fiber felt, KOH was used as activator and molten salt as medium to make pores of nano-carbon fiber at high temperature. The results show that the pore volume and specific surface area can be greatly improved and the pore structure can be improved by adding a small amount of KOH in molten salt medium. When the activation temperature is 800 鈩，

本文編號：2182727