本文選題：原位反應燒結 + 燒結性能　； 參考：《人工晶體學報》2016年05期

【摘要】：實驗原料選用高純電熔鎂砂(粒徑3~1 mm);α-Al_2O_3(活性)微粉(粒徑≤5μm);電熔鎂鋁尖晶石(粒徑≤1mm);Al粉(粒徑≤0.088 mm);化學純Mg O(粒徑≤0.04μm)和少量的活性材料,氮化氣氛下原位反應制備MgAlON復合材料,考察了氮化燒結后試樣的常規性能、物相組成、顯微結構。結果表明:1500℃下,氮化氣氛中耐火基質料為Al-Al_2O_3-Mg O系的混合粉可以通過原位反應制備MgAlON復合材料;骨料種類的不同,不影響MgAlON礦相的生成。且Mg Al2O4-MgAlON材料的燒結性能及氮化效果較好,常溫強度也較高。試樣骨架結構是骨料大顆粒在燒結中形成的,骨架中填充著反應合成的MgAlON晶粒和骨料小顆粒,使得燒成后的試樣內部結構致密;微晶結構以及晶須的存在有利于提高材料的常溫力學性能。
[Abstract]:The experimental materials used high pure electric magnesia (particle size 3~1 mm), alpha -Al_2O_3 (active) micro powder (particle diameter less than 5 u m), fused magnesia aluminum spinel (particle diameter less than 1mm), Al powder (particle diameter less than 0.088 mm), chemical pure Mg O (particle diameter less than 0.04 mu m) and a small amount of active material, and in situ reaction under nitriding atmosphere to prepare a MgAlON composite material, and investigate the routine of the specimen after nitriding sintering. Performance, phase composition and microstructure. The results show that the MgAlON composite can be prepared by in-situ reaction by the in-situ reaction of the refractory matrix material of Al-Al_2O_3-Mg O system in the nitriding atmosphere at 1500 C, and the different types of aggregates do not affect the formation of MgAlON ore phase. And the sintering and nitriding effect of Mg Al2O4-MgAlON material is better, and the normal temperature strength is also good. The skeleton structure of the specimen is formed in the sintering of large aggregate particles. The MgAlON grains and small aggregate particles are filled in the skeleton, which makes the internal structure of the specimen burned after the sintering is compact, and the microcrystalline structure and the existence of the whisker are beneficial to the improvement of the mechanical properties of the material at normal temperature.
【作者單位】： 黃河科技學院;摩根新材料上海有限公司;
【基金】：河南省高等學校重點科研項目(16A430019)
【分類號】：TB33

【參考文獻】

相關期刊論文 前4條

1 劉然;張欣媛;王杏娟;高福;呂慶;;熱壓燒結制備BN-MgAlON復合材料及其力學性能研究[J];人工晶體學報;2015年08期

2 郭艷芹;張海燕;;礬土基MgAlON復合材料的制備及性能研究[J];硅酸鹽通報;2015年08期

3 程竹;孫加林;李福q，

本文編號：2061261