Ni含量對化學鍍結合粉末冶金法制備的WC-Ni復合材料組織和性能的影響(英文)
發布時間:2018-02-04 18:44
本文關鍵詞: WC-Ni復合材料 化學鍍 粉末冶金 出處:《稀有金屬材料與工程》2017年10期 論文類型:期刊論文
【摘要】:采用簡化預處理輔助化學鍍法制備了WC-Ni復合粉體,結合壓制燒結法獲得了不同Ni含量的WC-Ni復合材料。通過FESEM,EDS和XRD檢測手段分析了原始WC粉、WC-Ni復合粉體形貌和WC-Ni復合材料的表面形貌和斷口特征。研究了不同Ni含量對WC-Ni復合材料組織和性能的影響規律。結果表明,Ni顆粒均勻包覆在WC粉體表面,WC-Ni復合材料具有細小均勻的晶粒分布;隨著Ni含量的增加,WC-Ni復合材料的抗彎強度增加,硬度基本保持不變,斷口形貌表現出穿晶斷裂特征。
[Abstract]:WC-Ni composite powders were prepared by simplified pretreatment assisted electroless plating, and WC-Ni composites with different Ni content were obtained by pressing sintering method. FESEM was used. The original WC powder was analyzed by EDS and XRD. The morphology of WC-Ni composite powder and the surface morphology and fracture characteristics of WC-Ni composite were studied. The effect of Ni content on the microstructure and properties of WC-Ni composite was studied. The uniform coating of Ni particles on WC powder surface shows fine and uniform grain distribution of WC-Ni composite. With the increase of Ni content, the flexural strength of WC-Ni composites increases, the hardness remains unchanged, and the fracture morphology shows transgranular fracture characteristics.
【作者單位】: 合肥工業大學;有色金屬與加工技術國家地方聯合工程研究中心;臺州學院;
【基金】:National Magnetic Confinement Fusion Program(2014GB121001) Fund Project of Zhejiang Provincial Key Laboratory for Cutting Tools(ZD201301)
【分類號】:TB33;TF125
【正文快照】: Tungsten carbides are widely employed in tribologicalfields because of their good performance and good wearresistance[1 5].For cemented carbides,the properties canbe modified by the presence of a second phase[6].Cobalt,as the second phase,shows good wet
【相似文獻】
相關期刊論文 前10條
1 崔升;沈曉冬;肖蘇;高志強;;化學鍍法制備金屬銅包覆納米碳化硅[J];粉末冶金技術;2008年04期
2 周超蘭;張高科;甘慧慧;;化學鍍法制備鈷包覆碳化硅復合粉末的研究[J];武漢理工大學學報;2011年07期
3 曾高峰;史蕾;徐恒泳;;用化學鍍法制備Pd/Ag膜時膜厚和組成的控制[J];催化學報;2009年12期
4 梁勝德,朱時珍,趙振波,鐘家湘;化學鍍法制備金屬/陶瓷復合粉體的特點及應用[J];材料導報;1996年05期
5 陳慕容;賀躍輝;江W,
本文編號:1490884
本文鏈接:http://sikaile.net/shekelunwen/minzhuminquanlunwen/1490884.html
最近更新
教材專著