本文選題：勘察設計 + 工程項目��； 參考：《蘭州交通大學》2015年碩士論文

【摘要】：工程勘察與設計的質量,直接關聯著的不僅是建設工程本身的經濟效益、社會效益以及環境效益,也關系著人民的生命和財產的安全。勘察設計的質量責任主體是勘察設計單位,國務院發布的《建設工程質量管理條例》明確規定,勘察設計單位必須對其勘察設計的質量負責。誰勘察設計誰負責,是國際通行的準則。這就要求勘察設計單位建立健全的質量管理體系,并持續改進其有效性,不斷增強滿足工程建設質量要求的能力。論文以JK公司為例,旨在以項目管理的視角,運用SWOT分析法和5M1E要素分析法,對JK公司工程勘察設計項目的特點以及該公司勘察設計質量管理方面存在的問題進行分析,說明在JK公司中建立項目質量管理體系的必要性;通過列舉當前公司內部工程勘察設計質量中存在的主要問題,并分析其成因,提出勘察設計項目質量管理體系建立的模式,明確勘察設計項目質量方針,針對影響質量的因素,從質量管理體系構建、質量管理體系操作應用和項目質量考評三個方面為JK公司的勘察設計質量提供保證;基于PDCA(計劃、實行、處理、檢查)循環原理、工程項目質量控制三階段(事前控制、事中控制和事后控制)原理以及工程項目質量的三全控制原理(全面質量控制、全過程質量控制和全員參與質量控制),運用ISO9000族標準的過程方法,提出以質量計劃編制為主的設計計劃過程質量控制方案,并以實際設計項目為例,對項目的質量管理模式進行應用和分析,運用現代項目管理理論中的項目質量管理理論和方法,探討如何對影響勘察設計質量的重要控制對象、關鍵部位和薄弱環節設置質量控制點,并進行質量控制,確保達到勘察設計質量目標,力圖為勘察設計項目質量管理提供指導。
[Abstract]:The quality of engineering investigation and design is directly related not only to the economic, social and environmental benefits of the construction project itself, but also to the safety of people's life and property. The main body of quality responsibility for reconnaissance and design is the survey and design unit. The regulations on quality Control of Construction Engineering issued by the State Council clearly stipulate that the survey and design unit must be responsible for the quality of investigation and design. It is an internationally accepted norm who is responsible for the investigation and design. This requires the investigation and design units to establish a sound quality management system, and continuously improve its effectiveness, constantly enhance the ability to meet the quality requirements of engineering construction. Taking JK Company as an example, this paper aims to analyze the characteristics of JK Company's engineering survey and design project and the problems existing in the quality management of the company's survey and design by using SWOT analysis and 5M1E element analysis from the point of view of project management. This paper explains the necessity of establishing the project quality management system in JK Company, lists the main problems existing in the internal engineering survey and design quality of the company at present, analyzes its causes, and puts forward the mode of establishing the quality management system of the survey and design project. Make clear the quality policy of survey and design project, aiming at the factors affecting quality, provide guarantee for JK company's survey and design quality from three aspects: quality management system construction, operation application of quality management system and project quality evaluation, based on PDCA, The principle of cycle, the principle of three stages of project quality control (prior control, in-process control and post-control) and the principle of total quality control of engineering project quality. The whole process quality control and the whole staff participate in the quality control, using the process method of the ISO9000 family standard, put forward the design plan process quality control plan which is based on the quality plan compilation, and take the actual design project as an example. The application and analysis of the quality management mode of the project, the application of the theory and method of the project quality management in the modern project management theory, and the discussion on how to control the important objects that affect the quality of the survey and design are discussed. Quality control points are set up in key parts and weak links, and quality control is carried out to ensure the quality target of survey and design, and to provide guidance for quality management of reconnaissance and design projects.
【學位授予單位】：蘭州交通大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TU201;F426.92

【相似文獻】

相關期刊論文 前10條

1 ;建設工程項目設計簡介[J];給水排水;2001年01期

2 ;建設工程項目設計簡介[J];給水排水;2001年07期

3 章曉波;剖析工程項目設計回訪[J];工程建設與設計;2003年03期

4 徐江才;關于送審工程項目設計應注意的幾個問題[J];浙江建筑;1995年04期

5 朱劍君;;工程項目設計管理的重要性探討[J];科技創業家;2012年18期

6 張姝;;建筑工程項目設計與施工[J];中華建設;2011年08期

7 佘春勇;周函;;水利工程項目設計團隊績效評價研究[J];科技經濟市場;2007年12期

8 郭紅龍;張U，

本文編號：1896084