【摘要】：為了提高光纖傳感器系統的檢測質量,設計并實現了智能光纖傳感器系統。首先采用光纖將輻射傳遞到光電二極管,并通過該管輸出信號,實現光電變換。然后采用模數A/D變換器將電信號變換成數字信號,向P89C668單片機輸入數字信號后通過軟件對物體進行動態調整。最后采用數字模擬變換器將信號變換成電壓信號輸出,實現了CAN總線通訊接口設計與傳感器系統的組網。結果表明,該系統的檢測誤差低于1℃,可對光源進行平穩控制,具有較高的抗干擾性。
[Abstract]:In order to improve the detection quality of optical fiber sensor system, an intelligent fiber optic sensor system is designed and implemented. Firstly, optical fiber is used to transmit radiation to the photodiode, and the output signal is realized by the output signal of the diode. Then the analog-digital A / D converter is used to transform the electrical signal into a digital signal, and then the digital signal is input to the P89C668 single-chip computer, and then the object is dynamically adjusted by the software. Finally, the digital analog converter is used to transform the signal into voltage signal output, and the design of communication interface of CAN bus and the networking of sensor system are realized. The results show that the detection error of the system is lower than 1 鈩，

本文編號：2465062