本文選題：SOPC + FPGA��； 參考：《中國科學院大學(中國科學院工程管理與信息技術學院)》2017年碩士論文

【摘要】：數據采集系統發展到現今,高速采集、高速傳輸、并行處理、實時分析已成為新的發展趨勢。在實際應對某SPARC V8架構CPU的可靠性測試任務中,被采樣信號數量多、頻率高,經高速采樣后,會產生大量的原始數據,這對數據采集系統的采樣率、數據處理能力、數據傳輸帶寬提出了新的挑戰與要求。此時,傳統的數據采集設計方法與技術已經很難滿足這種高性能、高速、實時、并行處理的要求,因此需開發一種新型的高速數據采集系統來應對新的挑戰。為了解決上述難題,本文提出了新的解決方案,即在傳統的設計方法上引入了更為先進的設計思想和技術:FPGA(Field Programmable Gate Array)技術、PCI Express總線技術、SOPC(System on a Programmable Chip)技術。將FPGA引入數據采集系統可以增加系統設計的靈活性和穩定性;PCI Express總線作為現今最先進的計算機總線技術,可以最大化的增加系統數據傳輸帶寬。將SOPC技術引入數據采集系統則可以簡化電路設計,增加后期系統可移植性和維護性,并增強與系統之間的人機交互性。因此本文將著重討論三種技術的特點及在高數數據采集系統中的應用方法。其中將詳細闡述系統核心元器件選型的原則,硬件電路的設計原理,PCI Express總線物理層的主流實現方法及優缺點,DDR3高數緩存的應用方法,以及實際電路設計中高速PCB的設計原則與方法,以及高速信號的信號完整性分析與仿真方法等。最后針對SOPC開發的環節,介紹IP核(Intellectual Property Core)的移植和重用,多核協同處理的方法,從硬件到軟件對新型數據采集系統整體做一個詳細的分析與設計。通過本文的分析與設計,希望可以將三種先進的技術融合到新型高數數據采集系統當中,真正實現采集系統在信號采樣率、數據處理能力、數據傳輸帶寬等性能提升的同時,同步增強系統設計的簡便性,靈活性、可移植性、電路穩定性,同時還具有操作簡捷明了,良好的人機交互界面等優點。在大數據時代的今天,基于SOPC、FPGA、PCI-E技術的高速數據采集系統將具有更廣泛的應用,對工業4.0的發展及人工智能的進步具有重要的意義。
[Abstract]:With the development of data acquisition system, high speed acquisition, high speed transmission, parallel processing and real-time analysis have become a new trend. In the testing task of reliability of a SPARC V8 architecture CPU, the number of sampled signals is large and the frequency is high. After high speed sampling, a large amount of raw data will be produced, which is the sampling rate and data processing ability of the data acquisition system. Data transmission bandwidth presents new challenges and requirements. At this time, the traditional data acquisition design method and technology have been difficult to meet the requirements of high performance, high speed, real time, parallel processing, so it is necessary to develop a new high speed data acquisition system to meet the new challenges. In order to solve the above problems, a new solution is proposed in this paper, that is, the more advanced design idea and technology are introduced into the traditional design method. The Array (Field Programmable Gate Array) technology and the PCI Express bus technology (system on a Programmable Chip) are introduced. Introducing FPGA into the data acquisition system can increase the flexibility and stability of the system design. PCI Express bus is the most advanced computer bus technology, which can maximize the data transmission bandwidth of the system. The introduction of SOPC technology into the data acquisition system can simplify the circuit design, increase the portability and maintainability of the later stage system, and enhance the man-machine interaction with the system. Therefore, this paper will focus on the characteristics of the three technologies and the application method in the high number data acquisition system. The principle of selecting the core components of the system, the design principle of hardware circuit, the mainstream realization method of PCI Express bus physical layer and the application method of DDR3 high number cache are described in detail. The design principle and method of high speed PCB in practical circuit design, signal integrity analysis and simulation method of high speed signal are also discussed. Finally, aiming at the development of SOPC, this paper introduces the transplantation and reuse of IP core and the method of multi-core cooperative processing, and makes a detailed analysis and design of the new data acquisition system from hardware to software. Through the analysis and design of this paper, it is hoped that the three advanced technologies can be integrated into the new high number data acquisition system, so as to improve the signal sampling rate, data processing capability, data transmission bandwidth and so on. Synchronous enhancement system design is simple, flexible, portability, circuit stability, but also has the advantages of simple and clear operation, good man-machine interface and so on. In the era of big data, the high-speed data acquisition system based on SOPC-FPGA PCI-E technology will be more widely used, which is of great significance to the development of industry 4.0 and the progress of artificial intelligence.
【學位授予單位】：中國科學院大學(中國科學院工程管理與信息技術學院)
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TP274.2

【相似文獻】

相關期刊論文 前10條

1 QQ糖;PCI-E的“良”芯——航嘉磐石400電源[J];大眾硬件;2005年04期

2 陳楚;;簡述PCI的特點[J];企業導報;2011年04期

3 葉金才;;基于PCI-E接口的高速數字信號處理系統設計[J];微計算機信息;2011年05期

4 ;撥開云霧 PCI-E顯卡走馬看花[J];電腦采購周刊;2004年38期

5 云鳥;;菜鳥實用PCI-E顯卡選購之路[J];電腦采購周刊;2005年38期

6 ;王牌對王牌 12款主流 PCI-E顯卡橫向測試[J];電腦迷;2005年08期

7 夢幻笑容;;平民級PCI-E主板導購[J];電腦迷;2005年15期

8 玉米;;700元買什么PCI-E顯卡?[J];電腦迷;2005年17期

9 ;PCI-E專業顯卡ELSA ATI FireGL V7100上市[J];CAD/CAM與制造業信息化;2005年01期

10 ;答問題,免費獲得能升級的PCI-E顯卡[J];電腦愛好者;2005年10期

相關重要報紙文章 前7條

1 江蘇 王意;PCI-E顯卡市場爭奪戰[N];電腦報;2005年

2 Freeman;將64位閃龍帶入PCI-E世界[N];中國計算機報;2005年

3 星星;PCI-E顯卡“長”勢喜人[N];電腦報;2005年

4 中國計算機數字實驗室 吳東;4款低端PCI-E顯卡比拼[N];中國計算機報;2005年

5 ;PCI-E顯卡時代到來[N];電腦報;2005年

6 彭承文;700元以下PCI-E顯卡橫向比拼[N];中國計算機報;2005年

7 ;解讀PCI-E插槽速率問題[N];中國電腦教育報;2010年

相關碩士學位論文 前5條

1 賈磊;基于SOPC的PCI-E高速數據采集系統的設計及實現[D];中國科學院大學(中國科學院工程管理與信息技術學院);2017年

2 吳夏風;PCI-E圖像采集卡的開發[D];電子科技大學;2009年

3 侯冰;FPGA實現的PCI-E高速數據采集系統[D];西安電子科技大學;2012年

4 蘇振宇;基于FPGA和DSP的PCI-E高速密碼卡設計與實現[D];山東大學;2012年

5 王帥;基于PCI-E總線SDH信號處理關鍵技術研究[D];解放軍信息工程大學;2007年

，

本文編號：2062816