本文選題：支撐梁結構設計　切入點：多目標優化集成　出處：《計算機集成制造系統》2017年10期

【摘要】：為降低高層數控裁床的支撐梁質量和運動慣量,提高其結構剛度,提出一種多種工程分析手段為一體的集成式優化設計方法,即結構建模、系統仿真、面向應模型與多目標優化相結合的優化策略。利用正交試驗對支撐梁做面響應分析,從而獲取近似模型。進一步采用NSGA-Ⅱ算法進行多目標尋優搜索生成Pareto最優解集。計算結果表明,該方法不但可以有效地尋找到在支撐梁質量和結構剛度上都有很大改善的方案,并且對提高布料裁床動態性能、降低能耗也具有很好的工程應用價值。
[Abstract]:In order to reduce the mass and motion inertia of the support beam and improve the stiffness of the support beam, an integrated optimization design method, I. e., structural modeling, system simulation, is proposed. An optimization strategy based on the combination of the response model and multi-objective optimization is proposed. The orthogonal test is used to analyze the plane response of the braced beam. Then the approximate model is obtained and the Pareto optimal solution set is generated by using NSGA- 鈪，

本文編號：1676318