發布時間：2018-03-27 23:00

  本文選題：鋁電解槽　切入點：ZigBee　出處：《傳感技術學報》2017年03期

【摘要】：針對鋁電解槽側壁傳統溫度檢測誤差大、時間不連續、成本昂貴、信噪比低等問題,設計了一種基于ZigBee和MLX90614非接觸式紅外溫度傳感器的鋁電解槽側壁溫度監測系統。系統硬件選用CC2530為主芯片,MLX90614為溫度測量傳感器;系統軟件基于TI公司的ZStack-2.5.1a協議棧進行設計,同時開發基于B/S模式(服務器/瀏覽器模式)的上位機軟件幫助工作人員實時查看和分析溫度數據�，F(xiàn)場測試結果證明:該系統部署方便,網絡數據傳輸可靠,節點采集溫度的誤差在3℃以內,上位機軟件正常工作。該系統能夠?qū)崿F(xiàn)鋁電解槽側壁溫度的實時監測。
[Abstract]:Aiming at the problems of large error, discontinuous time, high cost, low signal-to-noise ratio and so on, the traditional measurement error of sidewall temperature of aluminum reduction cell is large. A side wall temperature monitoring system of aluminum reduction cell based on ZigBee and MLX90614 non-contact infrared temperature sensor is designed. The hardware of the system adopts CC2530 chip MLX90614 as the temperature sensor, and the system software is designed based on TI's ZStack-2.5.1a protocol stack. At the same time, the host computer software based on the B / S mode (server / browser mode) is developed to help the staff to view and analyze the temperature data in real time. The field test results show that the system is easy to deploy and the network data transmission is reliable. The error of node acquisition temperature is less than 3 鈩，

本文編號：1673620