本文選題：兩集束型裝備　切入點：半導體制造　出處：《數學的實踐與認識》2017年05期

【摘要】：針對有滯留時間約束和并行加工的兩集束型裝備調度問題,分別推導了三類不等式約束條件,包括加工模塊處于加工和空閑兩種狀態下的滯留時間約束、任意單個和兩個搬運作業情況下的機械手搬運能力約束,以及緩沖模塊能力約束,從理論上證明了并行加工模塊等價加工時間的合理性,建立了以最小化生產周期為目標的混合整數規劃模型.隨機算例和基準算例的仿真結果驗證了模型的可行性和有效性.
[Abstract]:For two cluster equipment scheduling problems with detention time constraints and parallel machining, three kinds of inequality constraints are derived, including the retention time constraints of machining modules in the two states of processing and idle processing. It is proved theoretically that the equivalent processing time of parallel processing module is reasonable for any single and two handling operations, such as manipulator handling capacity constraints and buffer module capacity constraints. A mixed integer programming model with the aim of minimizing the production cycle is established. The simulation results of random and benchmark examples verify the feasibility and validity of the model.
【作者單位】： 大連外國語大學軟件學院;遼寧警察學院公安信息系;
【基金】：遼寧省教育廳科學研究一般項目(L2015137,L2014011,L2014455,L2014456) 遼寧省大學生創新創業訓練計劃項目(201610172000015)
【分類號】：TN305;O221.4
，

本文編號：1678112