二極管鉗位型高壓發射橋路研究
[Abstract]:With the rapid development of economy, the demand for mineral resources is increasing day by day. Deep exploration is an effective way to solve the crisis of mineral resources. Controllable source audio detection (Controlled Source Audio-frequency Magnetotelluric,CSAMT) is an effective method for deep detection. It has the advantages of large depth, high working efficiency, high resolution and strong anti-jamming ability. The instrument is composed of transmitter and receiver. High-voltage and high-power emission is helpful to enhance the response signal intensity of magnetotelluric field, improve the signal-to-noise ratio of the collected signal, and increase the resolution of the detecting instrument. As a key device of the transmitting system, the research of the high-voltage and high-power transmitting bridge is of great significance to the improvement of the transmitting efficiency, the detection accuracy and the accuracy of the data interpretation of the transmitting system. In this paper, based on the principle of diode-clamped multilevel inverter, the topology and timing control strategy of diode-clamped high-voltage transmission bridge for electrical source transmitter are presented, according to the requirements of high-voltage and high-power emission exploration by frequency domain electric method, and based on the principle of diode-clamped multilevel inverter. The half-period three-level approximate square wave emission in current continuous mode is realized, and the high-voltage and high-power transmitting device of 1200V/20A is developed. The experimental results show that the transmitter has the characteristics of high transmission power, low resistance of required power devices, low electromagnetic interference and high reliability, which can meet the requirements of audio-frequency magnetotelluric method detection with controllable source.
【學位授予單位】:吉林大學
【學位級別】:碩士
【學位授予年份】:2016
【分類號】:TH763.1
【相似文獻】
相關期刊論文 前10條
1 徐秉天;;廣義橋路在帶電測試中的應用問題[J];電力技術;1980年12期
2 趙永健;;利用反饋使橋路測量線性化[J];工業儀表與自動化裝置;1981年01期
3 蔡敏學;惡劣條件下的氣橋檢測[J];儀器儀表學報;1980年04期
4 黃履環;;橋路搭接問題處治案例[J];城市道橋與防洪;2013年01期
5 趙揚;自動平衡記錄儀測量橋路的改進[J];計量與測試技術;1995年05期
6 吳玉巖;;應變檢測的一種新橋路[J];工業儀表與自動化裝置;1985年05期
7 萬子芬 ,李劍;消除溫度漂移的橋路[J];儀表技術與傳感器;1994年04期
8 汪現中;提高橋路信號測量精度的方法[J];電測與儀表;1996年05期
9 張鵬飛;CD-001型氧分析器測量橋路故障的檢查與處理[J];電子儀器儀表用戶;1995年01期
10 方筠;;高速鐵路橋路過渡段施工技術[J];安徽建筑;2008年04期
相關會議論文 前1條
1 李金;燕兵;;鐵路橋路管理現狀及存在的主要問題[A];高速重載與普通鐵路橋隧運營管理與檢測修理技術論文集(上冊)[C];2010年
相關重要報紙文章 前8條
1 通訊員 蔡政;市財政局率先在大橋路安裝停車架[N];安康日報;2009年
2 記者 潘潤生;大橋 大路 大美[N];安康日報;2011年
3 珠海特區報評論員;為何一條路建了十幾年都沒建好[N];珠海特區報;2012年
4 童光麗邋岳躍強 實習生 田波;未來新橋不再偏[N];團結報;2007年
5 記者 田丕 通訊員 楊若愚;大橋路片區建立健全長效機制[N];安康日報;2010年
6 杜鈺邋記者 王晶;打通內環“腸梗阻”:年內連接十二橋路和青羊正街[N];成都日報;2008年
7 通訊員 寧建新邋記者 李冀;“小手術”緩解老城支路大問題[N];南京日報;2008年
8 記者 陶瑋;解讀老照片 喜看新成就[N];嘉興日報;2008年
相關碩士學位論文 前2條
1 胡越;二極管鉗位型高壓發射橋路研究[D];吉林大學;2016年
2 張濤;基于灰色理論的高速鐵路橋路分界高度選擇原則的研究[D];西南交通大學;2006年
,本文編號:2436483
本文鏈接:http://sikaile.net/kejilunwen/yiqiyibiao/2436483.html