本文選題：鉑電阻非線性 + 最小二乘法　； 參考：《自動化與儀表》2014年02期

【摘要】：盡管鉑電阻"非線性校正"有多種方法,或校正的溫區范圍不寬,或校正的計算過程頗為復雜等,通用性不強。這里在對鉑電阻非線性函數求逆運算常見手段簡要總結后,采用最小二乘法結合權函的方法,對鉑電阻正溫區按3種區段進行了擬合運算,得到了三次、四次多項式系數,并給出了擬合運算誤差分布圖。在0~650℃溫區范圍內,應用四次多項式擬合運算,最大誤差僅為0.003℃。最后簡要分析了C語言運算精度與實算數據,進一步證實了多項式直接擬合的優越性。
[Abstract]:Although there are many methods for "nonlinear correction" of platinum resistor, either the temperature range of correction is not wide, or the calculation process of correction is rather complicated, so it is not universal.In this paper, after a brief summary of the common methods of calculating the nonlinear function inversion of platinum resistance, using the method of least square method combined with weight function, the positive temperature region of platinum resistance is fitted according to three sections, and the cubic and fourth polynomial coefficients are obtained.The error distribution map of fitting operation is also given.In the temperature range of 0 鈩，

本文編號：1772759