【摘要】：為了減小液晶波前校正器的響應時間,本文結合光控取向技術,研究了取向?qū)宇A(yù)傾角及錨定強度特性對器件響應性能的影響。以液晶動力學方程為依據,分析預傾角效應對液晶器件響應時間的影響;利用預傾角及錨定強度與響應時間的定量關系,推導出錨定強度與預傾角的關系,從而簡化了錨定強度的測量方法。采用光譜法監測了光控取向膜的取向度;以此為依據,利用4種不同曝光方式獲得了不同的預傾角。理論模擬及實驗結果一致表明:偶氮染料分子(SD1)獲得一定的錨定強度后,通過降低其預傾角角度,其所制器件的響應性能實現了優化。
[Abstract]:In order to reduce the response time of liquid crystal wavefront corrector, the effects of preinclination angle and anchoring strength characteristics of orientation layer on the response performance of liquid crystal wavefront corrector are studied in this paper. Based on the dynamic equation of liquid crystal, the influence of predip effect on the response time of liquid crystal device is analyzed. Based on the quantitative relationship between preinclination angle and anchoring strength and response time, the relationship between anchoring strength and predip angle is derived, which simplifies the measurement method of anchoring strength. The orientation degree of the optically controlled orientation film was monitored by spectroscopy, and different predip angles were obtained by using four different exposure methods. The theoretical simulation and experimental results show that after the azo dye molecule (SD1) obtains a certain anchoring strength, the response performance of the device is optimized by reducing its preinclination angle.
【作者單位】： 中國科學院長春光學精密機械與物理研究所應用光學國家重點實驗室;中國科學院大學;
【基金】：國家自然科學基金資助項目(No.61205021)~~
【分類號】：TN873.93

【相似文獻】

相關期刊論文 前5條

1 王學毅;高棟梁;葉菁;;移動網絡中短消息響應時間的研究[J];郵電設計技術;2008年06期

2 ;色彩VS響應時間——三款新品LCD分析測試[J];現代計算機(普及版);2006年01期

3 ;響應時間,液晶永遠的痛?[J];電腦;2003年01期

4 范兵;;外磁路渦流對鐵氧體開關響應時間的影響[J];現代雷達;2012年01期

5 ;[J];;年期

，

本文編號：2492726