【摘要】：電子紙是一種類紙顯示技術,它一經出現就得到了人們的關注。一方面,它具有紙一般的顯示效果。另一方面,它的能耗特別低。在如今日益強調節能環保的社會里,電子紙的出現不僅可以減少人們對紙張的需求,還可以使人們獲得紙質般的閱讀體驗,因此電子紙作為顯示技術的一個發展方向,將會發揮越來越重要的作用。電子紙?jiān)谧鳛轱@示標簽使用時需要面臨顯示刷新的問題,如果所有的標簽都通過下載線來接收顯示內容必將使整個電子紙顯示模塊變復雜且不易用,而通過無線方式就可以很好的解決這個問題。無線顯示內容的控制不僅使電子紙模塊的結構更加簡單,使用起來也會更加方便,尤其是在一定范圍內對多個顯示模塊的內容進行修改時,使用無線顯示控制會大大提高工作質量和效率。本論文首先介紹了幾種不同類型電子紙技術并對這幾種電子紙實現方式作了分析對比,還介紹了電子紙常用的三種驅動方式及電子紙顯示驅動中一些重要的概念。在深入學習了SSD1608驅動芯片的驅動原理與使用方法后利用MSP430型單片機實現了與驅動芯片的通信連接,并對芯片的顯示緩沖數據區、驅動掃描方式及驅動電壓等相關參數的設置原理進行了詳細闡述,并在此基礎上實現了對點陣型電子紙的驅動。在實現對電子紙驅動的基礎上,本論文還設計了電子紙顯示內容無線控制系統,在實現系統前需要對顯示驅動模塊的功能進行改進,通過將藍牙模塊集成到顯示驅動模塊中,并對驅動程序增加數據收發處理及Flash操作程序,使顯示驅動模塊具備無線數據收發能力。隨后設計出顯示內容無線控制的上位機,該上位機一方面需要對選取的圖片進行處理以滿足驅動模塊的顯示需求,另一方面要通過上位機的串口通信模塊完成對藍牙的無線連接配置及數據收發等操作。最后在系統聯合調試的過程中需要對兩個系統的數據處理格式及處理速度進行匹配以保證數據收發的正常進行。該系統經過反復測試,可以很好的實現對電子紙顯示內容的無線控制,達到了預期設計目的。整套系統使用了低功耗的芯片,藍牙模塊無線通信穩定可靠,電子紙顯示效果好,上位機性能穩定功能豐富。
[Abstract]:Electronic paper is a kind of paper display technology. On the one hand, it has paper general display effect. On the other hand, its energy consumption is particularly low. In a society with increasing emphasis on energy conservation and environmental protection, the emergence of electronic paper can not only reduce people's demand for paper, but also enable people to obtain paper-based reading experience. Therefore, electronic paper is a development direction of display technology. Will play an increasingly important role. When the electronic paper is used as a display label, it has to face the problem of display refresh. If all the tags receive the display content through the download line, it will make the whole electronic paper display module complex and difficult to use. And through wireless way can solve this problem very well. The control of wireless display content not only makes the structure of electronic paper module simpler, but also makes it more convenient to use, especially when the content of multiple display modules is modified within a certain range. The use of wireless display control will greatly improve the quality and efficiency of work. In this paper, several different kinds of electronic paper technologies are introduced, and the realization methods of these electronic paper are analyzed and compared. At the same time, three kinds of driving methods commonly used in electronic paper and some important concepts in electronic paper display drive are also introduced. After deeply studying the driving principle and using method of SSD1608 driver chip, the communication connection with the driver chip is realized by using MSP430 microcontroller, and the display buffer data area of the chip is also given. The setting principle of the driving scan mode and the driving voltage and other related parameters are described in detail, and on this basis, the point matrix electronic paper driving is realized. Based on the realization of electronic paper driver, this paper also designs a wireless control system for electronic paper display content. The function of display driver module needs to be improved before the realization of the system, and the Bluetooth module is integrated into the display driver module. Data processing and Flash operation program are added to the driver, so that the display driver module has wireless data transceiver ability. Subsequently, the host computer with wireless control of display content is designed. On the one hand, the upper computer needs to process the selected pictures to meet the display requirements of the driving module. On the other hand, Bluetooth wireless connection configuration and data transceiver should be completed through serial communication module of host computer. Finally, it is necessary to match the data processing format and processing speed of the two systems in the process of joint debugging. After repeated tests, the system can achieve the wireless control of electronic paper display content, and achieve the desired design purpose. The whole system uses low power chip, the Bluetooth module wireless communication is stable and reliable, the electronic paper display effect is good, the host computer performance stability function is rich.
【學位授予單位】：電子科技大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TN873

【參考文獻】

相關期刊論文 前10條

1 鄭寧來;;全球首款石墨烯電子紙[J];合成技術及應用;2016年02期

2 李國相;孟舒獻;馮亞青;;彩色雙粒子微膠囊電泳顯示的研究進展[J];化工進展;2015年S1期

3 劉先明;王利;易子川;水玲玲;周國富;;基于直流平衡的電子紙驅動方法的研究[J];華南師范大學學報(自然科學版);2015年03期

4 申曉杰;翁惠輝;;基于C#的串口通信上位機的設計與應用[J];電子世界;2014年03期

5 周國富;易子川;王利;盧偉雄;;電泳電子紙驅動波形研究現狀與前景[J];華南師范大學學報(自然科學版);2013年06期

6 李大鵬;;關于計算機軟件開發語言的研究[J];計算機光盤軟件與應用;2012年06期

7 ;短距離無線通信技術對比[J];電子技術應用;2011年03期

8 戴杰;黃煒;;電紙書市場調研[J];印制電路信息;2011年01期

9 劉仁慶;;電子紙及其發展[J];中華紙業;2010年09期

10 馬捷;朱克;李慶誠;;有源矩陣電泳電子紙顯示控制研究[J];現代顯示;2010年04期

相關碩士學位論文 前1條

1 彭志鑫;微膠囊型電子墨水及其有源動態驅動器件設計[D];浙江大學;2012年

，

本文編號：2296968