本文選題：配電自動化 + 有線通信�。� 參考：《江蘇大學》2016年碩士論文

【摘要】：配電自動化通信網的設計在配電自動化系統中起著至關重要的作用。遠方數據采集、遠方控制、故障定位與隔離、負荷轉移等功能的實現都依賴于終端設備和主站之間的通信系統,可以說通信系統質量直接決定配電自動化系統性能的優劣,然而通信模式多種多樣,每種模式的存在都有其各自適用范圍,可能某種模式在某一系統中應用良好,但在其他系統中卻不能正常工作。因此,針對不同情況制定出一套合理的通信系統尤為重要。實際工作中情況多變,必須要把基礎理論和具體實際情況結合考慮,從經濟性、可靠性、建設難易程度多方面綜合考量,選出最適合當前系統的通信模式。論文主要工作如下:1.分析了不同通信方式的性能,主要從有線通信方式和無線通信方式兩方面展開分析,總結了不同通信方式的優點和缺點:光纖成本越來越低,運用的場所也越來越多。DLC技術衰耗大,仍處于試驗研究階段。數傳電臺在負荷控制系統以及城市照明系統中得到廣泛應用。擴頻通信基于電力線,抗干擾強,前景良好。2.深入研究了光纖通信方案,對光纖通信方式的特點、功能、以及實施方案做了具體規劃。在設計通信模式時應用了GPRS技術,對GPRS技術進行了詳細的介紹,它可應用于遠程、數據量較小、數據接收發出頻率高的配電自動化系統,并提出了利用GPRS技術實現的通信方式。3.根據以上相關技術的研究,結合泰州供電公司的實際情況,分析了當前存在的問題和不足,對泰州供電公司的配電自動化通信方式從功能劃分、通信分層、通信網結構、通信介質、實施方案幾個方面進行合理設計。并結合自身工作經歷,詳細介紹了泰州域配用電通信網改造工程。4.在泰州市區完成配電自動化和通信網絡的全覆蓋,實現“三遙/二遙”、配電SCADA、饋線自動化、配電運行管理等功能,逐步提高調度員的遠方控制能力,采用信息交換總線實現與相關系統的互聯,充分發揮各項功能在調度管理中的應用。未來增加電網分析應用功能,以配電拓?fù)涞姆治鰬?yīng)用和實用功能為基礎,滿足故障情況時系統快速自愈,有效提高區域內供電可靠性。
[Abstract]:The design of distribution automation communication network plays an important role in distribution automation system. The realization of remote data acquisition, remote control, fault location and isolation, load transfer and other functions all depend on the communication system between terminal equipment and main station. It can be said that the quality of communication system directly determines the performance of distribution automation system. However, there are a variety of communication modes, each mode has its own scope of application, one mode may be well used in one system, but it can not work properly in other systems. Therefore, it is very important to develop a reasonable communication system according to different situations. The situation in practice is changeable, so we must combine the basic theory with the actual situation, and choose the most suitable communication mode for the current system from the aspects of economy, reliability and construction difficulty. The main work of this paper is as follows: 1. This paper analyzes the performance of different communication modes, mainly from the aspects of wired communication mode and wireless communication mode, and summarizes the advantages and disadvantages of different communication modes: the cost of optical fiber is getting lower and lower. More and more sites are used. DLC technology is still in the stage of experimental study. Data transmission station is widely used in load control system and city lighting system. Spread spectrum communication based on power line, strong anti-interference, good prospects. 2. In this paper, the scheme of optical fiber communication is deeply studied, and the characteristics, functions and implementation of the mode of optical fiber communication are planned. GPRS technology is applied in the design of communication mode, and GPRS technology is introduced in detail. It can be used in distribution automation system with remote, small data volume and high data receiving and sending frequency, and a communication mode .3. realized by GPRS technology is put forward. According to the above related technology research, combined with the actual situation of Taizhou Power supply Company, the existing problems and shortcomings are analyzed. The communication mode of distribution automation of Taizhou Power supply Company is divided into functions, communication layers and communication network structure. Communication medium, the implementation of several aspects of reasonable design. And combined with their own work experience, the Taizhou area distribution power communication network transformation project. 4. Complete distribution automation and communication network coverage in Taizhou urban area, realize the functions of "three remote / second remote", distribution SCADA, feeder automation, distribution operation management, etc., and gradually improve the dispatcher's remote control ability. The information exchange bus is used to realize the interconnection with related systems, and the application of all functions in dispatching management is brought into full play. In the future, the power network analysis and application functions will be added, based on the analysis, application and practical functions of the distribution topology, the system will be able to heal itself quickly in case of failure, and effectively improve the reliability of power supply in the area.
【學位授予單位】：江蘇大學
【學位級別】：碩士
【學位授予年份】：2016
【分類號】：TM76;TN914

【參考文獻】

相關期刊論文 前10條

1 李子韻;成樂祥;王自楨;李晨;徐荊州;肖光旭;;配電自動化終端布局規劃方法[J];電網技術;2016年04期

2 馬潤;;配電自動化相關問題探討[J];企業技術開發;2015年35期

3 郭偉;楊競悅;胡啟盟;;配電網通信光纜網絡集中監測管理系統設計[J];云南電力技術;2015年06期

4 張旭東;李中平;高志建;張敬平;;基于EPON的配電自動化通信技術研究[J];電氣工程學報;2015年11期

5 王穎;趙航宇;趙洪山;;配電網自動化建設的現狀與若干建議[J];電工技術;2015年11期

6 冼浩欣;;配電網自動化應用中存在的問題及對策[J];企業技術開發;2015年29期

7 谷君;張梅，

本文編號：2113396