本文選題：毫米波 + 相陣�。� 參考：《西安電子科技大學學報》2017年06期

【摘要】：針對毫米波相陣架構提出了一種迭代波束成形方法.該方法利用在陣列較大的情況下,毫米波信道不同路徑的近似正交的性質,通過在收發端陣列不斷對信號進行迭代發送和接收,從而獲取毫米波信道中具有最大增益的路徑,并以最大增益路徑對應的陣列響應作為收發雙方的波束成形向量.仿真表明,該方法能夠獲得接近于奇異值分解方法的頻譜效率,實現高速率數據傳輸;同時具有快速收斂的特性,一般在迭代3次后算法收斂.
[Abstract]:An iterative beamforming method is proposed for millimeter wave phased array architecture. This method utilizes the approximately orthogonal property of different paths of millimeter-wave channel in the case of large array, and obtains the path with maximum gain in millimeter-wave channel by iterating over and receiving signals from the array at the transceiver end. The array response corresponding to the maximum gain path is used as the beamforming vector of both the transceiver and receiver. Simulation results show that the proposed method can obtain the spectral efficiency close to that of the singular value decomposition method and achieve high rate data transmission. At the same time, it has the property of fast convergence, which generally converges after three iterations.
【作者單位】： 電子科技大學通信抗干擾技術國家重點實驗室;中國電子科技集團第54研究所通信網信息傳輸與分發技術重點實驗室;上海宇航系統工程研究所;
【基金】：國家自然科學基金資助項目(61401447,61571082) 通信網信息傳輸與分發技術重點實驗室開放課題資助項目(KX152600016/ITD-U15007)
【分類號】：TN928
，

本文編號：1890990