發布時間：2018-05-11 03:42

  本文選題：電力通信網 + 重要度評估��； 參考：《華北電力大學》2017年碩士論文

【摘要】：電力通信網的重要度評估能夠識別網絡關鍵節點和鏈路,對于提高網絡可靠性,減少網絡損失具有重要意義。目前電力通信網的重要度評估方法大都是基于拓?fù)浣Y(jié)構,考慮業務特征的方法相對較少,且對電力通信網效能評估問題關注較少。由于電力通信網中業務具有行業特殊性,因此單純從拓?fù)鋵用婧饬恐匾染哂幸欢ň窒扌�。本課題的開展,綜合考慮網絡拓?fù)鋵雍蜆I(yè)務層影響因素,彌補現有研究的不足,有效提高評估準確性。對電力通信網的重要度評估、效能評估方法以及現有的相關成果進行深入研究,提出跨層融合的評估方法。首先,對國內外與本課題相關的研究成果進行分析,對電力通信網評估方法進行總結;分析了電力通信網絡拓?fù)鋮?shù)和承載的主要業務及其性能要求,細化了特征指標法評價電力通信網業務重要度時的比較值;其次,選用自然連通度作為網絡拓?fù)淇箽詼y(cè)度,以此衡量網絡元素失效后對拓?fù)鋵拥钠茐某潭?從而得到拓?fù)渲匾?結合電力通信網業務層網絡模型,闡述了節點業務重要度和鏈路業務重要度的計算方法。此外,將網絡元素承載的業務以權值的形式引入自然連通度的計算中,定義了網絡加權自然連通度,根據節點、鏈路失效后加權自然連通度的變化給出融合拓?fù)鋵蛹皹I(yè)務層的節點融合重要度和鏈路融合重要度的概念,實現了電力通信網跨層融合重要度評估。再次,針對電力通信網效能評估問題,結合節點和鏈路重要度等作為指標,采用ADC法建立電力通信網效能評估模型,該模型層次清晰,利于計算。最后,通過實驗進行對比分析,驗證了融合評估方法的可行性與有效性。
[Abstract]:The importance evaluation of the power communication network can identify the key nodes and links of the network. It is of great significance to improve the network reliability and reduce the loss of the network. At present, most of the evaluation methods of the importance of the power communication network are based on the topology structure, and the methods of considering the business characteristics are relatively small, and are concerned about the effectiveness evaluation of the power communication network. Because the business in the power communication network has the specialty of industry, it is limited to measure the importance simply from the topology level. The development of this topic, considering the network topology and the influence factors of the business layer, make up the shortage of the existing research and effectively improve the accuracy of the evaluation. The method and the existing related achievements are deeply studied, and the evaluation methods of cross layer fusion are put forward. Firstly, the research results related to this subject are analyzed, and the evaluation methods of the power communication network are summarized. The topology parameters of the power communication network and the main requirements of the carrier and their performance requirements are analyzed, and the characteristic index method is refined. The comparison value of the importance of the power communication network is evaluated. Secondly, the natural connectivity is chosen as the network topology destruction measure to measure the damage degree of the topology layer after the failure of the network elements, thus the topology importance is obtained, and the importance of the node business and the link business importance are expounded in combination with the network model of the power communication network. In addition, the network weighted value of network elements is introduced into the calculation of natural connectivity. The weighted natural connectivity of the network is defined. The concept of the fusion importance and the link fusion importance of the fusion topology layer and the business layer is given according to the changes of the weighted natural connectivity after the link failure. In this paper, the importance evaluation of the cross layer fusion of the power communication network is presented. Thirdly, in view of the effectiveness evaluation of the power communication network, combined with the node and link importance as the index, the ADC method is used to establish the effectiveness evaluation model of the power communication network. The model is clear and helpful to the calculation. Finally, the experiment is carried out to verify the fusion evaluation method. Feasibility and effectiveness.

【學位授予單位】：華北電力大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TN915.853;TM73

【參考文獻】

相關期刊論文 前10條

1 鄧博仁;唐良瑞;郝建紅;閆江毓;;電力SDH傳輸網的風險評價[J];電力系統自動化;2016年20期

2 狄立;鄭征;夏e，

本文編號：1872283