本文選題：二進制輸入信道 + M-PAM/M-QAM　； 參考：《電子科技大學學報》2017年02期

【摘要】：研究了當采用最常用的M-QAM調制時極化碼構造的問題。在M-QAM調制時無法確定極化碼的碼元噪聲功率,從而導致無法有效地進行信道極化。針對該問題,對M-QAM調制符號中的每個比特進行了研究,得到所有調制符號對應的比特的變化規律,通過這一規律,可以將高階調制信道分解為多個平行的并具有固定噪聲功率的二進制輸入子信道,使得極化碼在M-QAM調制下的構造問題變?yōu)榱顺Ｒ?guī)的二進制輸入信道下的構造問題,并以此實現了M-QAM調制時極化碼的構造。針對常用的格雷映射下的M-PAM/M-QAM調制進行了設計并仿真,仿真結果顯示該構造方法能明顯地提升性能。
[Abstract]:The problem of constructing polarimetric codes when the most commonly used M-QAM modulation is used is studied. It is impossible to determine the symbol noise power of the polarimetric code during M-QAM modulation, which results in the channel polarization being unable to be effectively carried out. In order to solve this problem, every bit in the M-QAM modulation symbol is studied, and the change law of the bits corresponding to all the modulation symbols is obtained. The higher-order modulation channel can be decomposed into a plurality of parallel binary input subchannels with fixed noise power, so that the construction of polarization codes under M-QAM modulation becomes the construction problem of conventional binary input channels. The polarization code of M-QAM modulation is constructed with this method. The M-PAM/M-QAM modulation based on Gray map is designed and simulated. The simulation results show that the proposed method can improve the performance obviously.
【作者單位】： 電子科技大學通信抗干擾技術國家級重點實驗室;
【基金】：國家973項目(2013CB329001) 國家自然科學基金(61371105) 高等學校博士學科點專項科研基金(20110185120025)
【分類號】：TN911.22
，

本文編號：1856734