發布時間：2018-04-14 19:40

  本文選題：紅外陣列 + 半實物仿真�。� 參考：《哈爾濱工業大學》2017年碩士論文

【摘要】：隨著紅外與激光技術的飛速發展,紅外制導武器也在日漸成熟,不斷朝著實時性強、分辨率高以及可控性好的方向發展。作為制導武器的主要試驗和評估手段,紅外陣列半實物仿真系統對數據量和數據傳輸速率的要求也在不斷提高,針對現有的半實物仿真系統實時性差的缺點,本文設計應用于紅外陣列半實物仿真中的光纖高速傳輸系統,該系統采用自主設計的光纖通信協議,擺脫了原系統對于反射內存卡的依賴性,結構更加合理,具有傳輸速度快、可移植性強等特點,能夠保證紅外陣列半實物仿真系統的實時性。本文主要研究?jī)?nèi)容如下:首先,研究光纖網絡通信領域中被廣泛應用的光纖通道協議的拓?fù)浣Y(jié)構及協議棧結構,提出適用于數字通信系統中的光纖通信協議,結合對現有的系統方案的分析,構建以自主設計的光纖通信協議為基礎的紅外陣列半實物仿真光纖高速傳輸系統,并對總線機理、光纖通信實現技術以及主控制器的性能進行研究和分析,為系統的各部分功能設計提供了必要的保障和指引。其次,規劃紅外陣列半實物仿真光纖高速傳輸系統的硬件整體架構,并對各部分硬件進行了分析和設計,建立了包含總線接口單元、并串/串并轉換單元、光收發模塊單元、主控制器單元以及電源模塊在內的系統硬件框架,并以信號完整性理論為基礎,研究高速傳輸系統布線技術,為系統硬件的功能實現提供了保障。然后,研究邏輯設計中的跨時鐘域和時序優化等關鍵技術,進而以此為基礎構建光纖通信協議IP(Intellectual Property)核整體架構,對IP核中的總線控制模塊、緩存器模塊、發送和接收控制模塊進行了分析和設計,并對各個模塊的功能進行仿真,結果顯示各個模塊均能正常工作。最后,搭建系統測試平臺,并編寫上位機軟件和驅動程序,對總線接口和光纖通信功能分別進行測試,確保其均能正常工作,進而展開對系統的綜合測試,并用嵌入式邏輯分析儀對其性能進行評估,結果顯示,本課題設計的紅外陣列半實物仿真光纖傳輸系統可以達到很高的傳輸速率,能滿足課題要求。
[Abstract]:With the rapid development of infrared and laser technology, infrared guided weapons are becoming more and more mature, and developing towards the direction of high real-time, high resolution and good controllability.As the main test and evaluation means of guidance weapon, the requirement of data and data transmission rate of infrared array hardware-in-the-loop simulation system is also increasing, aiming at the shortcoming of the existing hardware-in-the-loop simulation system's poor real-time performance.In this paper, the optical fiber high-speed transmission system is designed and applied in the simulation of infrared array. The system adopts the self-designed optical fiber communication protocol, and gets rid of the dependence of the original system on the reflective memory card. The system is more reasonable in structure and has fast transmission speed.Because of its strong portability, it can guarantee the real-time performance of infrared array hardware-in-the-loop simulation system.The main contents of this paper are as follows: firstly, the topology and stack structure of fiber channel protocol, which is widely used in the field of optical fiber network communication, is studied, and the optical fiber communication protocol suitable for digital communication system is proposed.Based on the analysis of the existing system scheme, an infrared array hardware-in-the-loop simulation optical fiber high-speed transmission system based on the self-designed optical fiber communication protocol is constructed, and the bus mechanism is analyzed.The implementation technology of optical fiber communication and the performance of the main controller are studied and analyzed, which provides the necessary guarantee and guidance for the functional design of each part of the system.Secondly, the hardware architecture of the hardware-in-the-loop simulation fiber-optic high-speed transmission system with infrared array is planned, and the hardware of each part is analyzed and designed, and the bus interface unit, serial / series-parallel conversion unit, optical transceiver module unit are established.Based on the theory of signal integrity, the cabling technology of high speed transmission system is studied, which provides the guarantee for the realization of the hardware function of the system.Then, the key technologies in logic design, such as cross clock domain and timing optimization, are studied, and then the whole architecture of optical fiber communication protocol IP(Intellectual property core is constructed, and the bus control module and buffer module in IP core are analyzed.The module of sending and receiving control is analyzed and designed, and the function of each module is simulated. The results show that each module can work normally.Finally, the system test platform is built, and the upper computer software and driver are written to test the bus interface and the optical fiber communication function respectively, to ensure that they can work normally, and then to carry out the comprehensive test of the system.The performance of the system is evaluated by embedded logic analyzer. The results show that the infrared array hardware-in-the-loop simulation optical fiber transmission system designed in this paper can achieve a very high transmission rate and can meet the requirements of the project.
【學位授予單位】：哈爾濱工業大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TJ06;TN929.11

【相似文獻】

相關期刊論文 前10條

1 鄒文軍;;計算機幀時間對半實物仿真的影響[J];航天控制;1993年02期

2 任淑紅;吳曉燕;張慶波;;現代導彈半實物仿真技術探討[J];飛航導彈;2006年05期

3 陳靜;花瑞;宋炳生;;交叉口交通信號控制的半實物仿真平臺設計[J];武漢理工大學學報(信息與管理工程版);2008年05期

4 羅凱;孫軍亮;黨建軍;王育才;;水下熱動力系統半實物仿真研究[J];魚雷技術;2010年02期

5 黃建強;鞠建波;;半實物仿真技術研究現狀及發展趨勢[J];艦船電子工程;2011年07期

6 陸元章;王黎明;王鈞功;;泵控馬達負載反饋半實物仿真測試系統[J];上海交通大學學報;1986年06期

7 徐庚保;;捆綁型運載火箭姿態控制系統半實物仿真方法[J];航天控制;1990年02期

8 鄒文軍,楊敏;旋轉導彈自旋誤差對半實物仿真的影響[J];戰術導彈技術;1991年01期

9 孟代奎;姜蘭芳;李永鑫;;轉臺誤差對旋轉導彈半實物仿真的影響[J];航天控制;1992年03期

10 楊宏寧 ,劉鴻才;自旋導彈半實物仿真與交連[J];現代防御技術;1993年01期

相關會議論文 前10條

1 張聚;謝碧鋒;李敏;鄒向琪;;一種新的半實物仿真方法及應用[A];Proceedings of the 2011 Chinese Control and Decision Conference（CCDC）[C];2011年

2 孟秀云;劉藻珍;王肇敏;魏華梁;;制導航彈半實物仿真系統誤差分析與建模[A];加入WTO和中國科技與可持續發展——挑戰與機遇、責任和對策（下冊）[C];2002年

3 潘峰;薛定宇;陳大力;崔建江;;旋轉倒立擺運動控制半實物仿真平臺的設計與實現[A];Proceedings of 2010 Chinese Control and Decision Conference[C];2010年

4 夏也瑾;洪興昌;董錫君;;多姿多彩的尋的導彈半實物仿真技術[A];二○○一年中國系統仿真學會學術年會論文集[C];2001年

5 周莉莉;李艷雷;唐成;;半實物仿真技術在飛行器研制中的應用[A];2014第二屆中國指揮控制大會論文集（上）[C];2014年

6 楊志文;;線加速度傳感器接入回路的制導系統半實物仿真[A];仿真計算機與軟件、仿真方法與建模學術交流會論文集[C];2004年

7 周曉濱;方洋旺;許勇;;反輻射導彈制導系統半實物仿真軟件框架設計[A];第四屆中國軟件工程大會論文集[C];2007年

8 李q，

本文編號：1750736