本文關鍵詞： 窄帶雷達 寬帶雷達 灰色關聯度分析 進動特征提取 三維重構　出處：《空軍工程大學學報(自然科學版)》2017年02期 　論文類型：期刊論文

【摘要】：目標三維特征包含更為精細的結構和微動信息,以錐體彈頭為研究對象,提出了一種基于寬、窄帶混合體制雷達組網的錐體目標三維重構方法。首先建立錐體目標進動模型,詳細分析了目標在不同體制雷達回波中的微多普勒調制特性,然后,使用改進的viterbi算法和最小二乘法對各散射中心的幅相信息進行提取和估計,并通過灰色關聯度分析實現非理想散射中心的匹配。在此基礎上,構建寬、窄帶微多普勒信息融合方程組,解算出錐體目標的進動和結構參數,進而確定目標空間位置,實現三維重構。仿真結果表明,在信噪比為5dB情況下,目標的三維重構精度在91%左右。
[Abstract]:The three-dimensional feature of the target contains more precise structure and fretting information. Taking the cone warhead as the research object, a three-dimensional reconstruction method of the conical target based on the radar netted with wide and narrow band hybrid system is proposed. Firstly, the precession model of the pyramidal target is established. The characteristics of micro-Doppler modulation of target in radar echo of different systems are analyzed in detail. Then, the amplitude and phase information of each scattering center is extracted and estimated by using the improved viterbi algorithm and the least square method. On the basis of this, the fusion equations of wide and narrow band micro-Doppler information are constructed, and the precession and structure parameters of the cone target are solved, and the position of the target space is determined. The simulation results show that the accuracy of 3D reconstruction is about 91% when the SNR is 5 dB.
【作者單位】： 空軍工程大學防空反導學院;
【基金】：國家自然科學基金(61372166)
【分類號】：TN958
，

本文編號：1538896