【摘要】：最近研制的二級6-8型大腔體靜高壓裝置可在15GPa以上的壓力條件下進行厘米級樣品的高壓合成,對此裝置的高壓腔內置加熱元件進行了設計與實驗測試,并標定了不同的腔體壓力下加熱功率和溫度的關系,同時用六角氮化硼在沒有觸媒的情況下轉化成立方氮化硼的合成實驗驗證了此裝置所達到的溫壓條件。實驗結果表明,所設計的加熱組裝在高壓高溫下運行穩定,可以在壓力超過14GPa、溫度超過1 800℃的條件下進行厘米級樣品的高溫高壓處理。
[Abstract]:The recently developed two-stage 6-8 large cavity static high pressure device can be used to synthesize centimeter samples under the pressure above 15GPa. The design and experimental test of the high pressure cavity internal heating element of this device have been carried out. The relationship between heating power and temperature at different chamber pressure was calibrated, and the temperature and pressure conditions of the device were verified by the synthesis experiment of hexagonal boron nitride in the absence of catalyst. The experimental results show that the designed heating assembly works stably at high pressure and high temperature, and can be treated at high temperature and high pressure of centimeter grade samples under pressure over 14 GPA and temperature over 1 800 鈩，

本文編號：2277761